User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: Firmware Upgrade Management
62
Below is shown how to see which IP address the base has received from the DHCP server. In the
example we start the trace and filter on “bootp”. Then we power up the base which is connected to
the same network as the sniffer (wireshark). After a short while an offer is given by the DHCP
server, and it is possible to see that the base received the IP address 192.168.50.76
STEP 6 On the Login page, enter your authenticating credentials (i.e. username and password). By
default the username and password is admin. Click OK button.