User's Manual

SME VoIP System Guide, Version 1.5

Proprietary and Confidential

Chapter: SME VoIP Administration Interface

Chain section for details).

Valid Inputs: Enable, Disable

System chain ID

This is an identifier (in string format e.g. 2275) that is unique for a specific multi-

cell system.

Note: There can be several multi-cell systems in SME network. Up to 7 levels of

base stations chains are permitted in a typical setup. Please refer to accompanied

document [2] for further details and description.

Valid Input: 16 bit String length

Synchronization

time (s)

This specifies the period in seconds when elements/nodes (e.g. Base units) in a

specific Multi-cell should synchronise to each other.

Multi cell debug

Enable this feature, if you want the system to catalogue low level multi-cell debug

information or traces.

9.8.2 DECT System Settings

Description of DECT Settings for Specific Base units is as follows:

Parameter

Description

DECT system

RFPI

This is a radio network identity accessed by all Base units in a specific multi-cell

system. It composed of 5 octets. It is actually 5 different variables combined

together.

RFPI Format: XX XX XX XX XX (where XX are HEX values)

Note: Only type e.g. 11 6E 60 49 04 the system reformats as 0x11 0x6E 0x60 0x49

0x04

Access Rights Class (ARC):

Defines network identity structure used by terminals especially in multi-cell

environment. Fixed/default Value=1 (Private multi-cell system).

RFPI: 1X XX XX XX XX

Equipment Installer's code (EIC):

Code that allows terminals to distinguish between separate DECT networks.

Example_RTX_EIC: 0x16E6 (May change in the future)

RFPI: 11 6E 6X XX XX

Fixed Part Number(FPN):

Is a geographically unique identity transmitted to DECT networks to help PP

distinguish between base station communications in different cells/multi-cell

systems.

E.g. FPN: 0x049

RFPI: 11 6E 60 49 XX