User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: SME VoIP Administration Interface
53
Valid Inputs: positive integer
DST Start Time
DST start time in the day
Valid Inputs: positive integer
DST Start Day of Week
Day within the week DST begins
DST Start Day of Week, Last
in Month
Specify the week that DST will actually start.
DST Stop Month
The month that DST actually stops.
DST Stop Date
The numerical day of month that DST turns off.
Valid Inputs: positive integer (1 to 12)
DST Stop Time
The time of day DST stops
Valid Inputs: positive integer (1 to 12)
DST Stop Day of Week Last in
Month
The week within the month that DST will turn off.
9.8 Multi-cell Parameter Definitions
In this section, we describe the different parameters available in the Multi-cell configurations menu.
9.8.1 Settings for Base Unit
Description of Settings for Specific Base units is as follows:
Parameter
Description
Multi cell system
Enable this option to allow the Base unit to be set in multi-cell mode (can be set
either as master or slave in the multi-cell chain system – refer to MAC-units in