User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: SME VoIP Administration Interface
51
The SIP logs are saved in the file format: <MAC_Address><Time_Stamp>SIP.log
Trace Server
Enable this option to save mail traces.
Mail server traces are low level internal log messages or traces used for debug
purposes by RTX engineers.
Valid Input: Disable, Enable
Trace Server IP
Address
The trace server uses the same address as the configuration server.
Permitted value(s): AAA.BBB.CCC.DDD (Currently only IPv4 are supported) or url
(e.g.: firmware.rtx.net)
9.6 Firmware Update Definitions
In this page, the system administrator can configure how base stations and SIP nodes upgrade/downgrade
to the relevant firmware.
Parameter
Description
Firmware update server
address
IP address or DNS of firmware update files source
Valid Inputs: AAA.BBB.CCC.DDD or <URL>
Example: firmware.rtx.net or 10.10.104.41
Firmware path
Location of firmware on server (or firmware update server path
where firmware update files are located).
Example: /East_Fwu
Note: Must begin with (/) slash character
Required Version
Version of firmware to be upgraded (or downgraded) on Base station
or handset. Base units are referred to as gateways over here.
Valid Input(s): 8-bit string length. E.g. 0034, etc.