User's Manual

SME VoIP System Guide, Version 1.5

Proprietary and Confidential

Chapter: Installation of Base Stations/Repeater

6 Installation of Base Stations/Repeater

After planning the network, next is to determine the proper places or location the relevant base stations

will be installed. Therefore, we briefly describe the how to install the base station in this chapter.

6.1 Package - Contents/Damage Inspection

Before Package Is Opened:

Examine the shipping package for evidence of physical damage or mishandling prior to opening. If there is a

proof of mishandling prior to opening, you must report it to the relevant support center of the regional

representative or operator.

Contents of Package:

Make sure all relevant components are available in the package before proceeding to the next step.

Every shipped base unit package/box contains the following items:

2 x mounting screws and 2 x Anchors

1 x Metal plate(s)

1 x Plastic stand

1 x Cat. 5 cable (Ethernet cable)

Base unit

Damage Inspection:

The following are the recommended procedure for you to use for inspection:

1. Examine all relevant components for damage.

2. Make a “defective on arrival - DOA” report or RMA to the operator. Do not move the shipping

carton until it has been examined by the operator. If possible send pictures of the damage. The

operator/regional representative will initiate the necessary procedure to process this RMA. They

will guide the network administrator on how to return the damaged package if necessary.

3. If no damage is found then unwrap all the components and dispose of empty package/carton(s) in

accordance with country specific environmental regulations.