User's Manual

SME VoIP System Guide, Version 1.5
Proprietary and Confidential
Chapter: Handset - Service Menu Management
116
17.2.4 Status
This provides the present condition of the handset and the base station it is location registered to. Some of
the information available in this mode is described in the table below (this information is updated during
location request update from the DECT system).
Parameter
Description
SW Version
Base station: Current firmware installed on the current Base station the Handset is
location registered to.
Handset: firmware presently installed in the handset.
Format: Version Date Stamp (e.g.: 00.21 01-07-2010 00:00)
HW Version
Current hardware module used in base station and handset.
DECT Band
Operating frequency of system. DECT band includes UA, EU, LTAM, SA, N.A options.
IP Address
IP address of base station and handset
MAC Address
HW address of base station.
System Name
Name describing the SME network. Typically a string of 16 bytes.
Battery Level
Current handset battery energy position
17.2.5 IPEI
The IPEI (International Portable Equipment Identity) is a unique identification of portable part (handset)
and DECT Repeater. The IPEI is formatted and displayed in HEX, OCT, and OCT nomenclatures.