Operations Manual

SME VoIP Handset Guide 4.8
Proprietary and Confidential
Page | 34
6.5.1.8 Confirmation Sound
This feature either enables or disables confirmation sounds on the handset.
When the function “Confirmation sound” is enabled (On), an audible indication is given when an event succeeds
or fails. For example, a positive confirmation sound is generated when a new setting is set or an entry is saved
successfully in the phonebook. A negative confirmation sound is generated if the action fails.
When the confirmation sound is set to “Off” no sounds are generated in either case.
6.5.1.9 Coverage Warning
A coverage warning can be set to occur when the handset is out of range of a base station in the system.
When the feature “Coverage warning” is enabled (On) an audible indication is given in the earpiece of the
handset when the user is close to the maximum range of the nearest base station in the system. Hereby, the user
knows that the call is at the edge of the possible coverage of the call, and that the user must move back in
coverage to keep the call going.
NOTE: This feature is only working when the handset is in call. Not when in idle.