User's Manual

8AL90387ENAAed0a
57 /60
9.10.4 Other features
• Access MENU.
• Ring
• Vibrate/Ring You can adjust the buzzer/ringer mode according to your needs.
• Key sound Activate or deactivate the keypad tone.
• Confirmat. sound Activate or deactivate a signal when you confirm an action.
• Coverage warning Activate or deactivate the coverage warning.
• Charger warning Activate or deactivate a warning when the phone is charging.
• Low bat. warning Activate or deactivate Bip emission when low battery level is reached.
• Ascending ringing Activate or deactivate the ascending ringtone (Progressive ringing).
• Headset mode Activate or deactivate the headset mode.
• Apply.
• Return to idle.
• Access MENU.
• Settings.
• Economy mode Activate or deactivate the economy mode When the economy mode is
activated, the set adjusts its radio emission power according to the distance between the
set and the radio base. The closer the set is to the radio base, the lower is the radio
emission from the phone. This means that the phone is not always emitting at full power
and thus saves the battery.
• Security Activate or deactivate a timeout to trigger the automatic keylock, change the
keylock pin code or lock the function key.
• Handset name You can enter a name for your handset.
• Reset settings Reset the setting and go back to the default settings.
• Status Find out the software version of your phone.
• Auto answer Define how to answer an incoming call: off hook key, any key or automatic
answer.
• Silent charging Select whether silent mode is on or off when phone is charging.
• 2s key repeat For people with a disability, increases the repeat-key delay for the dial by
name feature.
• Apply.
• Return to idle.
The selection is retained even after switching the telephone on/off. The selection of a specific system
forces operation on a specific system. This selection must be changed if one wishes to change system.
Selecting 'Auto. select' enables the telephone to connect automatically when it enters a system coverage
zone. If the systems programmed in the telephone have common coverage zones, the telephone selects
the first system found.