User's Manual

Accessories
10
34
Other
10.1
Phone package
10.2
Chargers
Your phone charger is provided with the following equipments:
• How to load your phone on the desk support
• How to load your phone with the USB cable
When you purchase your phone, it is equiped with a clipbelt
installed on its back.
You can uninstall this clipbelt and replace it by the cap
provided in the box of your new phone.
• turn the clipbelt by doing a counterclockwise quarter
turn
• Uninstall the clipbelt by pulling it towards you.
Place the cover to put in place of clipbelt such as described
on the picture.
Push the cover towards the back of the phone until the
cover is clipped.
An ACDC adaptator made of a body and a separate plug head to
clip on the body ACDC adaptator.
An USB cable
A desk support for loading your phone
Put your phone on its support. Plug the USB cable on the 5V
socket of the desk support. Plug the other end of the USB cable
on the ACDC adaptator. Plug the adaptator on the mains power
supply.
Plug the USB cable on the USB plug of your phone. The other
end of the USB cable can be plugged on the ACDC adaptator or
on a computer USB plug.