User's Manual

29
 If the registration operation runs correctly (Subscription accepted), the telephone is ready for use, and the radio
coverage icon appears.
 If the registration operation has not been successful, the station proposes launching the subscription again.
 Depending on the type of system concerned, registration may require one or more additional operations on the
system.
Selecting your telephone system
Your telephone can be programmed to function on 5 different DECT systems (Alcatel-Lucent or GAP).
• access menu
•install
• register
• enter the pin code
• apply
• select a system
• enter park code
• apply
• enter access code
• apply
• select power mode
Launch subscription
• return to idle
• access menu
•install
• select network
• select the desired input (the chosen option is indicated by the radio button with
a central dot)
• return to idle
The selection is retained even after switching the telephone on/off. The selection of
a specific system (SYSTEM...) forces operation on a specific system. This selection
must be changed if one wishes to change system. Selecting 'Lock to any' enables
the telephone to connect automatically when it enters a system coverage zone. If
the systems programmed in the telephone have common coverage zones, the
telephone selects the first system found.