User's Manual

8212 DECT Handset
8AL90328ENAAed0a
13 /
3.6 Sending DTMF signals
During a call, you sometimes have to send DTMF signals, for example, for a voice message service, an
automatic switchboard or when remotely consulting an answering machine. To do this:
 Long press the star key.
 Enter DTMF code.
 Long press the star key to exit DTMF mode.
3.7 Make a second call
 You are in conversation with one caller.
 Dial the number. The first call will be on hold as soon as the second caller’s number is
dialed.
 Send the call.
 The first call is on hold.
Recover the call on hold:
 Hang up.
 Your telephone rings.
 Recover the call on hold.
3.8 Receiving a second call
When you receive a second call during conversation, the name or number of the incoming call is
displayed prefixed by “2=”. To take the second call, you have to end the first conversation.
3.9 Sending a calibrated cut-off
The calibrated cut-off activates functions such as transfer to another telephone set.To make a calibrated
cut-off: Press the 0 key (hold down for a few seconds).
3.10 Locking your telephone
This service enables you to prevent your phone being used.
Long press.
Unlock your terminal:
Long press.
29