User's Manual
Table Of Contents
- MBU 400
- Important Safety Information
- Importantes mesures de sécurité
- Software License Agreement
- FCC Information
- Safety Information
- Regulatory Information
- Table of Contents
- Congratulations!
- About This Guide
- MBU 400 Features
- Requirements
- What’s in the MBU 400 Box?
- MBU 400 Hardware
- Installing the MBU 400
- Optional MBU and Handset Tasks
- Using the MBU 400
- Troubleshooting
- Index
12 MBU 400 Installation Guide
Installing on a Wall
You can install the MBU on a wall if required. The MBU has two pre-
drilled wall mounting holes on the back of the unit (see illustration below).
To install the MBU on a wall:
1. Using the wall mount drilling template, locate and mark the position
for the mounting screws on the wall. Depending on the wall type, you
may need to use the wall anchors. Both the wall mounting screws and
wall anchors are included with your MBU.
2. If required, insert the wall anchors into the wall.
3. Insert the screws either into the wall anchors or into the wall (if no
wall anchors were required).
4. On the back of the MBU locate the wall mount holes and place these
holes over the screw heads on the wall.
5. Pull down and left to lock the unit into place.
6. Proceed to “Connecting the MBU 400” on page 14 to connect your
MBU using the cables provided.
Installing the MBU 400
Wall
Back of MBU
Wall Mounting Holes
Wall Mounting Screw
Wall Mounting Screw