User's Manual
Table Of Contents
- MBU 400
- Important Safety Information
- Importantes mesures de sécurité
- Software License Agreement
- FCC Information
- Safety Information
- Regulatory Information
- Table of Contents
- Congratulations!
- About This Guide
- MBU 400 Features
- Requirements
- What’s in the MBU 400 Box?
- MBU 400 Hardware
- Installing the MBU 400
- Optional MBU and Handset Tasks
- Using the MBU 400
- Troubleshooting
- Index
x MBU 400 Installation Guide
Safety Information
Safety Information
Important Safety Information
Charge the battery or handset only in combination with 420d Charger and
the SALOM SSW-1444 adapter that comes with the product. Plug the
SALOM SSW-1444 AC/DC adaptor in a wall outlet socket near the equip-
ment for easy access/removal of the AC/DC adaptor.
Important Battery Information
This product uses rechargeable Lithium-ion batteries 3.7V, 650mAh. Only
use batteries that come with the handset or dedicated spare batteries marked
with “Battery Pack 3.7V 650mAh Li-ion”. Do not use any other type, since
this may present a risk of leakage, re, explosion or other hazardous situa-
tion. For battery replacement or removal please remove the battery cover of
the handset. Never disassemble, customize or short-circuit batteries. Do not
place battery in re or heat the battery. Charge the battery or handset only
in combination with 420d Charger and the SALOM SSW-1444 adapter that
comes with the product.
Sensitive Electronic Environment
Any radio-based equipment can potentially cause interference with other
equipment and can be interfered from other equipment. This also applies for
DECT equipment. However due to the very low transmission power level
the chances for interference are very small. Research proves that operational
DECT phones normally don’t inuence electronic equipment however some
precautions must be taken into account for sensitive electronic equipment
e.g. sensitive laboratory equipment. When DECT phones operate in straight
nearness of sensitive electronic equipment incidental inuence can appear.
You are advised not to place the DECT phone on or close (less than 10cm)
to this kind of equipment, even in standby mode. Please also use the other
documentation supplied with the various parts of your telephone system.
Product Disposal Information
For countries in the European Union
The symbol depicted here has been afxed to your product
in order to inform you that electrical and electronic products
should not be disposed of as municipal waste.