Important Safety Instructions / Importantes Mesures De Sécurité When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm.
Keypad Lock Normal Operation During standby mode, you can lock the keypad by the following procedures. To Make & Receive Calls To make a new call – 1. Make sure the symbol on the handset screen is steady and this indicates good connection to the base unit. If the display show SEARCHING , it indicates the handset is too far away from the base unit. 2. You may enter the telephone number to be called before or after pushing button. Entered number will be dialed automatically. 1. 2. 3. 4.
To Delete Phone Book Memory 1. 2. 3. 4. 5. Personalizing Your Phone Push button to enter phonebook memory. Find your desired entry. Push button. Push button to select DELETE Push button to confirm. This DECT phone is built with features to offer you personalized settings, such as ringing melody, ringing volume and key click. or DELETE ALL . Different ringing melody and volume can be programmed to each handset. The entry is deleted! To set external ring melody: – To Change Phone Book Memory 1. 2. 3.
Please refer to below operation to apply on the two handsets you want to bring them to walkie-talkie mode Key Map:- Q1. My phone does not work! 1. 2. 3. 4. 5. 6. The display will show GROUP: . Enter any 4-digits number and both handsets must enter with the same number. The display will show HS NUMBER: . Define the handset number of the handset which already in the walkie-talkie mode. Now the two handsets are now in walkie-talkie mode.