User's Manual

1211
1.  Do not expose this product to dust, strong sunlight, humidity, high temperature or 
mechanical shock.
2.  Do not use corrosive or abrasive cleansers on this product. Keep the unit dust free by 
wiping it with a soft, dry cloth.
3.  Do not disassemble this product, it contains no user-serviceable parts.
4.  In case of a thunderstorm, it is advised to disconnect the power adaptor, as product 
warranty does not cover damage caused by lightning/serge.
5.  Only use adaptor and battery pack come with the package.
6. Use only supplied charging cradle for recharging the handset batteries.
Maintenance
Q1. My phone does not work!
A1. Make sure connection of adaptor cord are connected securely to the jack.
A1. Make sure you have inserted batteries into the handset battery compartment, and they 
are charged with good capacity and inserted with correct polarity.
A1. If you have connected more than one phone to the same cable modem, make sure all 
other telephones connected are put on hook. In some telephone systems, when the first 
phone on the same telephone line is used, all other telephones are electrically 
disconnected.
A1. Try to connect another telephone to the telephone socket, if the problem persists, it 
appears that there is a problem with your telephone line system, consult your network 
provider.
A1. If the person of the other end of the conversation does not hear your voice, make sure 
you have not activated the MUTE function. To test, activate the MUTE function once more 
and your phone should resume to normal operation.
A1. Check if the antenna symbol on the screen is shown. If it is not, it indicates your 
handset is too far away from the base unit and radio signal is too weak. You should get 
closer to the base unit and try again.
A1. In some critical situation, if the handset is without normal battery charging for a prolonged 
period of time, it may lock itself when battery level becomes too low. Try to disconnect the 
batteries and put them back on again and put the handset on charger for 12 hours to 
resume.
Q2. My phone does not ring!
A2. Check if the phone is set to Silence mode.
A2. Make sure your handset is not switched off.
Q3. The phone book memories do not work as expected!
A3. Make sure you do not enter telephone number longer than limits mentioned in the phone 
book section.
Q4. Caller’s number does not show on my phone!
A4. Make sure your phone line is provided with caller ID function from the phone service 
provider. In most countries, caller ID function must be paid and subscribed separately 
from normal phone function. For details, please consult phone service provider.
A4. Callers may suppress their caller’s number when making their phone call. Caller’s number 
does not necessary display when a call is received. For details, please consult phone 
service provider.
A4. If a call is made from abroad, caller’s number cannot be transmitted.
A4. Check the CLIP format of your country. Details please refer to CLIP FORMAT section.
Q5. My handset does not work after I have registered my handset to a base unit from 
different maker!
A5. According to DECT standard, handset (GAP compatible) can be registered to any DECT 
system base unit (GAP compatible). However, maker specific functions may not be 
compatible between products. It may happen that only basic function can be operated 
if handset and base unit from 2 makers are registered together.
A5. Check if the other base unit is GAP compatible according to DECT standard. Only GAP 
compatible products can be compatible to each other.
Trouble Shooting
1.  The display will show GROUP: .
2.  Enter any 4-digits number and both handsets must enter with the same number.
3.  The display will show HS NUMBER: .
4.  Define the handset number of the handset which already in the walkie-talkie mode.
5.  Now the two handsets are now in walkie-talkie mode.
6.  Push button following by the receiver handset number designated in procedure 
(4) to start a call.
7. Push button to end a call.
To disable walkie-talkie mode: –
Key Map:-
Please refer to below operation to apply on the two handsets you want to bring them to 
walkie-talkie mode
Key Map:-
Answer Type
This phone offers 2 answer type modes for the user to select.
Any Key: During “Any Key” mode, you can answer the incoming call by pushing any 
buttons.
Normal:  During “Normal” mode, you can answer the incoming call by only pushing
button.
You can change the answer type by the following procedure:-
Key Map:-
select “ANY KEY” or “NORMAL”