User's Manual

109
To Delete Phone Book Memory
If caller ID service is available from your service operator and you have subscribed to this
service, telephone number of the caller will be shown on the screens of handset when there
is an incoming call. If the number is stored in the phone book, the name will be displayed.
Caller Line Identification Presentation (CLIP) Memory (Caller ID)
NOTE:
– This DECT phone stores last 10 caller ID records into caller ID memory. Oldest record
will be replaced by newest record.
– For unread Caller ID records, there will be mark “ ” shown on the record.
To Review Caller ID Records
To Make Call from Caller ID Records
You may make a call from the caller ID records. Simply push button on the
handset when the desired caller’s number is shown when reviewing caller ID records.
This DECT phone is built with features to offer you personalized settings, such as ringing
melody, ringing volume and key click.
Personalizing Your Phone
Setting Ring Volume & Melody
Different ringing melody and volume can be programmed to each handset.
To set external ring melody: –
To set internal ring melody: –
Setting Key Beep
When Key Beep turned on, a beep is heard when you push on any button. You may also
select to turn key beep off.
Key Map:-
Key Map:-
Key Map:-
1. Push button to enter phonebook memory.
2. Find your desired entry.
3. Push button.
4. Push button to select DELETE or DELETE ALL .
5. Push button to confirm.
The entry is deleted!
To Change Phone Book Memory
1. Push button to enter phonebook memory.
2. Find your desired entry.
3. Push button.
4. Push button to select EDIT .
5. Push button to confirm.
6. You can now edit your entry.
1. Push button to enter Call log.
2. Push button to scroll among records.
3. The Caller ID memory also tells the date/time of the call.
scroll to your desired ring melody
scroll to your desired ring melody
To set ring volume: –
Key Map:-
scroll to your desired ring volume
select ON/OFF
To Delete Caller ID Records
You can delete all the Caller ID record in your phone by the following procedure:-
Key Map:-
browse the Caller ID record select
Naming Your Handset
You may name your handset up to your preference.
Key Map:-
Walkie-Talkie (N/A in US version)
If you have more than one handset, you can use the DECT phone as walkie-talkie. You
can use this function when you will be out of range from the cable modem. During walkie-
talkie mode, the handset cannot receive incoming calls and cannot make out-going calls.
enter your desired name
Enter the name up to 12 characters.