User's Manual
To Make & Receive Calls
To make a new call –
1. Make sure the symbol on the handset screen is steady and this indicates good
connection to the base unit. If the display show SEARCHING , it indicates the
handset is too far away from the base unit.
2. You may enter the telephone number to be called before or after pushing button.
Entered number will be dialed automatically.
Normal Operation
To receive a call –
1. If you have subscribed to caller ID service with your telephone operator, caller’s
number will show on the screen while the handset is ringing.
2. Simply push the button if you decide to answer the call.
To end a call, push button on the handset.
87
To Make & Receive Internal Calls (Intercom)
In a standard package, your phone comes with one handset only. Depending on the
package you have purchased (please consult product packaging), separate handset may
be included for extended usage.
Internal communication (INTERCOM) can be made between handsets - like intercom,
call transfer & conference conversation.
Each handset is given an individual extension number. This individual extension number
will be used when making intercom, call transfer & conference conversation.
To make an internal call to another handset
You may make intercom to another handset registered to the same E-MTA cable modem.
Long push button and entered desired handset number to send a ring to the desired
handset. When the intercom is answered by the designated handset, intercom conversation
can be started.
To answer an intercom ring, simply push button on the called extension unit.
Call Transfer
External call can be transferred from one handset to another handset.
1. During a conversation with external party.
2. Follow the instruction listed in above INTERCOM section to start an internal call,
external call will be put on hold until intercom has been established.
3. Wait till the designated internal handset answers the INTERCOM.
4. When the INTERCOM is answered, push button on the calling handset to
transfer the external call.
NOTE : If INTERCOM was not answered by designated handset, external call can be
retrieved by pushing button on the calling handset.
Keypad Lock
During standby mode, you can lock the keypad by the following procedures.
1. Push button
2. Push button
3. then, the icon and KEYS LOCKED will display on the screen.
4. To unlock the keypad again, please repeat above procedure.
There are 40 phone book memory banks built inside this DECT phone (12 characters and
24 digits). You may store frequently used number into these memory banks.
If more than one handset comes with your product package (refer to information on
package), phone book memories are independent among handsets. Phone book memory
will not be automatically transferred from one handset to the others.
Phone Book
To Make a New Entry
1. The display will show EDIT NUMBER .
2. Use the alphanumeric buttons (0 to 9) to enter a number. Push to save the record.
3. The display will show EDIT NAME .
4. Use the alphanumeric buttons (2-9) to enter a name in the same manner as you
manage alphabet input from your mobile phone. Use the button (0) to enter a space.
Push switch between upper and lower case. Push button to confirm.
5. A beep sound will be heard as confirmation.
To Make a New Entry from Caller ID Memory
You may copy a number stored in Caller ID memory to phone book. (Consult sections of
Caller ID for more details.)
To Make a Call from Phone Book Memory
Key Map:-
Or, you can directly enter the phonebook by pushing button.
1. You view the Call log to get your desired number.
2. Push button. The display will show COPY TO PHB .
3. Push button to confirm.
4. The display will show the number and ask you if you need to edit the number. If no
editing, please push button to confirm.
5. The display will show EDIT NAME .
6. Enter your name and push button to confirm.
1. Push button to view the phonebook memories.
Push button to find the desired entry.
2. Push button to make the call.