User's Manual

Handset Unit
Before going through the following keypad functions, it is a good idea to understand 
multiple functions may be assigned to a single button in order to reduce buttons cluster.
Button In Standby In Conversation
In Programming/Viewing Mode
Push this button to answer
an incoming call or to make
a call.
Long push this button to
turn on the handset.
This button functions as
Flash to switch between 2
lines
When reviewing phone
book, redial list or caller ID
records, push this button to
start dialing.
Preparation Before Use
The Menu Button
This DECT phone is built with a user-friendly MENU function. All essential functions of 
this phone can be programmed via the Menu button and Up/Down arrow button
by a question & answer (Q&A) approach.
By pushing the button on the handset, it leads you to browse through the 
following function menus in a circular manner. You may push to browse upward 
and to browse downward.
65
With the combination of Up/Down , , delete buttons, you can set 
your phone up with great ease.
Throughout the remaining part of this Instruction, for Users, a quick Key Map will lead 
you to different programming areas where you will be asked to make your selections.
For example: 
Key Map showing the key sequence for setting language area : –
Above Key Map shows you the following steps:-
1. On the handset, push and release button.
2.  Use buttons to scroll until is shown on the screen.
3.  Push to confirm.
Setting Language
Usually, English is factory-programmed display language. To change the language setting:–
Key Map:-
Key Map:-
HS Setting
OK
Language
OK
Long push this button to
turn off the handset.
Push this button to end an
call
0
–
9
To enter digit 0-9 To send DTMF signal 0-9 To enter digit 0-9
Push this button to enter
Call log
To adjust receiver volume
during conversation
To scroll through menu
selections
Push this button to enter
menu mode.
Long push this button and
followed by handset
number of the desired
calling handset to make
internal call to another
handset (if more than 1
handset is connected)
Press this button followed
by an internal handset
number to perform call
transfer. (If more than 1
handset is connected)
To confirm an action or
selection
Push this button to enter
redial list.
Long push this button to
activate speakerphone
mode
Push this button to
activate or deactivate
speakerphone mode
No function Mute In programming mode,
push this button to go back
to previous menu or to
cancel an action
1.  Use the button to browse through available languages.
2.  When desired language is shown, push button to confirm. A beep sound will be 
heard as confirmation.
Push this button to review
phonebook memories
To adjust receiver volume
during conversation
To scroll through menu
selections
To enter DTMF Push and hold this button
to insert a timed pause in
phonebook records
P
Push this button to switch
the upper/lower case
alphabet input in phone
book mode.
To return standby mode
Press and hold this button
to insert pause