User's Manual

3. Put the handset onto the charger unit, according to picture shown,
make sure charge indicator on the handset unit animates to show
charging in progress.
IMPORTANT NOTICE : To obtain best battery performance, keep the handset being
charged for 12 hours after first time installation.
In standby/idle mode:-
Display & their Indication
Replacement of Batteries
Depending on your usage, it is recommended to change rechargeable batteries every
year to achieve best performance.
Symbol Indication
A “RSSI” symbol received signal strength from the E-MTA
cable modem.
If the handset is out of range, the display will show
SEARCHING
This will show when the line is engaged
This will show when handset speakerphone mode is activated
This will show when handset microphone is muted
43
This will show when the phone is in intercom conversation
mode
This will show when the phone is in walkie-talkie mode
It shows the battery capacity.
During charging, it will show animated icon.
INT
2. On the handset, gently slide & open the battery cover and insert the rechargeable
batteries come with the package. Make sure batteries following the polarity indication
marked inside battery compartment. LCD screen will turn up as soon as battery connection
is through.
L1
L2
P
IMPORTANT NOTICE :
This DECT phone has to be registered to the E-MTA cable modem.
Please read carefully the “ READ ME FIRST ” before you start the following installation.
This will show when keypad lock is activated
The handset is in standby mode.
During standby mode, the given handset name will be
displayed.