User's Manual

78
3
Section
PROBLEM CAUSE SOLUTION
There is no antenna
symbol in the upper
right hand corner of
the display.
(continued)
•Thehandsetisnotregistered. •RegisterthehandsetviaSettings >
Cordles s settings > Register handset.
I do not understand
the language on the
handset.
•Youhavechosenthewrong
language.
•Fromtheidlescreen,pressMenu > 888,
then select your preferred language from
the list.
I cannot register the
handset to the base
station, the message
‘Open base station
could not be found’
is shown on the
handset.
•Thebasestationisturnedoff.
•Thebasestationisnotin
registration mode.
•Youaretoofarawayfromthe
base station.
•Turnthebasestationon.TheLEDlighton
the base station must be red.
•PresstheReset button on the back of the
base station, then press left
for Retry on
the handset.
•Movethehandsetclosertothebasestation
(for instance in the same room).
No Caller ID is shown
when I receive
landline calls.
•Youarenotsubscribingtothis
service with your landline
provider.
•Youareusinganincorrect
country setting.
•Contactyourlandlineprovider.
•Selectthecorrectcountrysettingvia
Setting s > Phone settings > Landline
country.
I do not get a new
line on my landline
connection when
sending a flash (by
pressing
).
•Youareusinganincorrect
country setting.
•Selectthecorrectcountrysettingvia
Setting s > Phone settings > Landline
country.
SUPPORT INFORMATION