Datasheet

9© 03/2018 | Technical changes without notice. | RTW GmbH & Co.KG | Am Wassermann 25 | 50829 Köln | Fon +49 221. 70 913-0 | Fax [phone] | [e-mail] | www.rtw.com
Connectors
ATTENTION! - For operating the TM3 Smart (TM3S), an appropriate mains adapter is required.
RTW recommends the use of the RTW wide voltage power supply 1178-R (100 - 240 V AC/24 V DC, 2.7 A)
approved for TouchMonitor. This power supply is included in the TM3 Smart (TM3S) package.
Connection
GP IO
(RJ-12-6P6C)
4-pin locking
low voltage
connector
24 V DC
160 mA
(nominal)
Display Unit
Analog In L/R (Sub-D) *)
3 AES3 In/Out (1 - 3, Sub-D) for each preset selectable
Interface Box
Analog In R
(RCA) *)
S/PDIF Out
(RCA)
S/PDIF In
(RCA)
Analog In L
(RCA) *)
USB 2.0 Mini-B
(USB interface cable
for the exchange
of Devicer DC1
and TM3S data
required)
Potentiometers for adjustment of the
input sensitivity of 0 dB reading
(150 mV to 30 V)
*) Analog In via RCA and
Analog In via Sub-D
cannot be used in parallel!