Datasheet

7© 03/2018 | Technical changes without notice. | RTW GmbH & Co.KG | Am Wassermann 25 | 50829 Köln | Fon +49 221. 70 913-0 | Fax [phone] | [e-mail] | www.rtw.com
Ø 3.5
[0.14“]
5
[0.2“]
5
[0.2“]
Ø 3.5
[0.14“]
2 | Side view1 | Front view
3 | Rear view
125.3 [4.93“]
82 [3.23“]
77 [3.03“]
[0.12“] 3 17.7 [0.7“]
20.7 [0.81“]
160 [6.3“]
82 [3.23“]
150 [5.9“]
41 [1.61“]
77 [3.03“]
Dimensions (continued)
Option TM3-2U
(can only be ordered together with a TM3S – allows mounting into front panels/mounting plates or into optional 19“/2U rack
carrier/mounting frame TM3-MA2U)
140.2 [5.52“]
80 [3.15“]
150 [5.9“]
[0.14“] Ø 3.5
[0.19“] 4.9
Ø 3.5 [0.14“]
4.9 [0.19“]
40 [1.57“]
Cutout: 80 x 140.2 [3.15“ x 5.52“]
Mounting plate
For adequate ventilation of the
device after mounting, the moun-
ting plate should have a maximum
thickness of 2 mm [0.08“]
Dimensions in mm [inch”]
Common tolerance: ±0,5 mm [±0.02”]
4 | Cutout of mounting plate
5 | Mounting
2 [0.08“]
3 [0.12“]
Screws:
M3 x (min. 6 mm [0.24“]
+ thickness of mounting plate)