Datasheet

3© 03/2018 | Technical changes without notice. | RTW GmbH & Co.KG | Am Wassermann 25 | 50829 Köln | Fon +49 221. 70 913-0 | Fax [phone] | [e-mail] | www.rtw.com
Hardware
TM3 Smart (TM3S)
• 6-channel version for Peak, TruePeak, correlation and
Loudness measurements, equipped with all licences
• Table-top unit with display unit and remote interface box
(cable length 2 m), with mains adapter
• 4.3“ touch screen (272 x 480 pixel)
• Loudness metering acc. to EBU R128, ITU-R BS.1770-3/
1771-1, ATSC A/85, ARIB, OP-59, AGCOM, CALM, or
customer specifi c
• Loudness Test Time Control, Loudness Chart
• Loudness Range (LRA) and SPL display
• Dialnorm measurement
• Timecode Reader
• Moving Coil
Additional Hardware Options
TM3-MA2U (2U rack carrier for TM3S with TM3-2U)
19“/2U rack carrier/mounting frame to be fi tted with up to
two TM3 series units which must feature the TM3-2U option.
TM3-2U (option for 2U rack mounting)
Option for mounting TM3S units into rack frame TM3-MA2U
or into other appropriate mechanical environments. It can only
be ordered together with a TM3S devices. Then, a display with
mounting frame, mounting material, and an USB extension
cable is part of delivery.
• Analog stereo input via RCA (unbalanced, with potentio-
meter adjustable in the range from 150 mV to 30 V) or
via 25 pin Sub-D (balanced, +4/+6 dBu, with software
adjustable in the range from 0 to +10 dBu)
• Digital Stereo in- and output via RCA (S/PDIF)
• Three digital Stereo in- and output via RCA (S/PDIF) or via
25 pin Sub-D (balanced, 3 x AES3)
• USB 2.0, GPIO, 24 V DC connectors
• Comprehensive set of presets, easy recall
• Personalizing with Devicer DC1 (Device Confi gurator
software for Windows
®
and Mac OS X
®
)