Datasheet

© 03/2018 | Technical changes without notice. | RTW GmbH & Co.KG | Am Wassermann 25 | 50829 Köln | Fon +49 221. 70 913-0 | Fax [phone] | [e-mail] | www.rtw.com10
24 V DC (4-pin locking low voltage, type Binder 710)
Pin: Function:
1 +24 V DC
2 +24 V DC
3 0 V
4 0 V
NOTE - An external overcurrent protective device (2 A max.)
shall be installed when using an external 24 V DC power supply!
Analog In L, Analog In R (unbalanced, RCA-F)
Pin: Function:
Pin: Signal
Ring: Shield/chassis
NOTE - The input sensitivity for 0 dB reading is adjustable in
the range from 150 mV to 30 V.
While using the RCA connectors, the corresponding inputs of the Sub-
D connector cannot be used.
(External view of the connector)
Sub-D connector (25-pin Sub-D-F)
Pin: Function:
1 Analog input R (+, hot)
14 Analog input R (–, cold)
2 Shield/chassis
15 Analog input L (+, hot)
3 Analog input L (–, cold)
16 Shield/chassis
4 Digital output 3 (+, hot)
17 Digital output 3 (–, cold)
5 Shield/chassis
18 Digital output 2 (+, hot)
6 Digital output 2 (–, cold)
19 Shield/chassis
7 Digital output 1 (+, hot)
20 Digital output 1 (–, cold)
8 Shield/chassis
21 Digital input 3 (+, hot)
9 Digital input 3 (–, cold)
22 Shield/chassis
10 Digital input 2 (+, hot)
23 Digital input 2 (–, cold)
11 Shield/chassis
24 Digital input 1 (+, hot)
12 Digital input 1 (–, cold)
25 Shield/chassis
13 not used
NOTE - The AES3 inputs are permanently terminated with110 .
While using the analog inputs of the Sub-D connector, the corresponding
analog RCA input connectors cannot be used.
USB Mini-B
Full Speed USB 2.0 interface for connecting the TM3S unit to the
computer using a standard USB data cable. The USB interface is
used for the data exchange between Device Confi gurator software
Devicer DC1 and TM3S.
Pin Assignment
P i n 1 4
P i n 1 5
P i n 1 6
P i n 1 7
P i n 1 8
P i n 1 9
P i n 2 0
P i n 2 1
P i n 2 2
P i n 2 3
P i n 2 4
P i n 2 5
P i n 1
P i n 2
P i n 3
P i n 4
P i n 5
P i n
6
P i n 7
P i n 8
P i n 9
P i n 1 0
P i n 1 1
P i n 1 2
P i n 1 3
(External view of the con-
nector)
Pin 2
Pin 1
Pin 3
Pin 4
(External view of the connector)
(External view of
the connector)
Pin Ring
Digital In, Digital Out (S/PDIF, unbalanced, RCA-F)
Pin: Function:
Pin: Signal
Ring: Shield/chassis
NOTE - The S/PDIF input is permanently terminated with 75 .
(External view of the connector)
Pin Ring
GPIO (RJ-12-6P6C socket)
External control of functions and presets recall as defi ned in the
Global Keyboard menu. The inputs defi ned as „active low“ have to be
switched against 0 V (Pin 1).
Pin: Function:
1 GND
2 - 6 Function acc. to defi nition in the menu
Block diagram of the GPIO interface