Datasheet

5 © 03/2020 | Changes without notice. | RTW GmbH & Co. KG | Am Wassermann 25 | 50829 Köln | Phone [phone] | Fax [phone] | [e-mail] | www.rtw.com
Hardware (continued)
Preconfi gured Models
The models are already preconfi gured for typical application fi elds and equipped with a corresponding audio interface. As the
previously described devices, they can be expanded with software modules (licences). We recommend licences SW20001 for
multi-channel operation, SW20002 for loudness measurements and SPL display, SW20004 for the use of the Surround Sound
Analyzer, and SW20006 for up to four audio vectorscopes, Multistandard PPM/VU moving coil emulations as basic confi gurati-
on for the following units. Further licences can be found in the Software section.
TM9-Video
9“ table-top unit for post production, TV broadcast, video editing
• 16-ch. digital inputs & outputs (2 x 4 AES3 In/Out, Sub-D)
• 3G-/HD-/SD-SDI In/Through (2 x BNC)
TM9-RAV
9“ table-top unit for AoIP network-based post production, TV
broadcast and video editing
• 32 Ravenna AoIP network channels (2 x RJ-45, Prim./Sec.)
• Power supply 12 - 24 V DC, 24 VA
TM9-AES16
9“ table-top unit for digital audio production, post production
• 16-ch. digital inputs & outputs (2 x 4 AES3 In/Out, Sub-D)
TM9-Studio
9“ table-top unit for audio production, post production
• 8-ch. analog inputs (Sub-D)
• 8-ch. digital inputs and outputs (4 x AES3 In/Out, Sub-D)
TM9-BNC
9“ table-top unit for digital audio production, post production
• 16-ch. digital inputs & outputs (8 x AES3id In, 8 x AES3id
Out, 16 x BNC)
TM9-Dante
9“ table-top unit for AoIP network-based post production, TV
broadcast and video editing
• 32 Dante™ AoIP network channels (2 x RJ-45, Prim./Sec.)
• Power supply 12 - 24 V DC, 24 VA