Datasheet

© 03/2020 | Changes without notice. | RTW GmbH & Co. KG | Am Wassermann 25 | 50829 Köln | Phone [phone] | Fax [phone] | [e-mail] | www.rtw.com 10
Connectors
ATTENTION! - For operating the 20900OEM version an appropriate mains adapter is required. RTW recom-
mends the use of the RTW wide voltage power supply 1178-R (100 - 240 V AC/24 V DC, 2.7 A) approved for Touch-
Monitor and available as an accessory. For 20900OEM and its combinations with mounting adapters TM9-MA4U, or
TM9-MADT, it has to be ordered separately.
This power supply is included in the 20900 table-top and the TM9-RAV, TM9-Dante, TM9-Video, TM9-Studio, TM9-
AES16 and TM9-BNC packages.
NOTE - Some devices may have a DC input connector marked +12 V DC. These units may be operated with a nominal
DC voltage in the range of +12 V to +24 V DC.
Connection
Analog In 1 - 8 (Sub-D)
AES3id In/Out 1 - 4 (8 x BNC)
AES3 In/Out 5 - 8 (Sub-D)
AES3id In/Out 5 - 8 (8 x BNC)
Analog In 9 - 16 (Sub-D)
Dante™/Ravenna AoIP
Link/Act 1G Secondary (RJ-45)
Dante™/Ravenna AoIP
Link/Act 1G Secondary (RJ-45)
AES3 In/Out 5 - 8 (Sub-D)
Analog In 1 - 8 (Sub-D)
AES3 In/Out 5 - 8 (Sub-D)
AES3id In/Out 5 - 8 (8 x BNC)
GP IO
(RJ-12)
AES3 In/Out 1 - 4 (Sub-D)
Analog In 1 - 8 (Sub-D)
AES3 In/Out 1 - 4 (Sub-D)
AES3id In/Out 1 - 4 (8 x BNC)
Analog In 1 - 8 (Sub-D)
Dante™/Ravenna AoIP
Link/Act 1G Primary (RJ-45)
Dante™/Ravenna AoIP
Link/Act 1G Primary (RJ-45)
AES3 In/Out 1 - 4 (Sub-D)
AES3 In/Out 1 - 4 (Sub-D)
AES3 In/Out 1 - 4 (Sub-D)
AES3id In/Out 1 - 4 (8 x BNC)
LAN
(RJ-45)
USB A 2.0
(Full Speed)
External:
USB fl ash drive
USB mouse
Wacom® graphics table
3G-SDI Through/In (not for AoIP panels)
HW20911 (fi gured):
HW20912:
HW20913:
HW20914:
HW20915:
HW20917/18:
TM9-Dante:
TM9-RAV
TM9-Video:
TM9-Studio:
TM9-AES16:
TM9-BNC:
Optional:
3G-SDI hardware option
HW20930 (for HW20911 to HW
20915 or TM9-Studio, -AES16,
-BNC, included in TM9-Video)
4-pin locking low
voltage connector
External:
Standard VGA
monitor 16 : 9
24 V 1 A/12 V 2 AVGA
or or
etherCON NE8MX-6-T/ NE8MX6 + wired CAT-7 S/FTP shield etherCON NE8MX-6-T/ NE8MX6 + wired CAT-7 S/FTP shield
or or