Data Sheet TouchMonitor TM7 Series
TouchMonitor TM7 Series product design award 2011 Modular Software • Touch Screen • Several I/O Options: Analog, AES3, AES3id, 3G SDI • Highly Flexible Screen Layout • 2-ch. PPM/True Peak • Multichannel • Loudness • LRA • Logging • Chart • Timecode • SPL • RTA • SSA • Radar • Premium PPM • BLITS The TouchMonitor TM7 range enters a new level of professional audio metering in terms of precision, performance, efficiency and flexibility.
Hardware Common Configuration • 7“ touch screen 16 : 9 TFT (800 x 480 pixel) • 16- or 24-channel audio interfaces (analog, AES3, AES3id, 3G-SDI, selection required, see below) • Connectors for Ethernet, VGA, 2 x USB 2.
Hardware (continued) Audio Interfaces (I/O Options) Different audio interfaces adapted to the main units are available.
Software Standard Software Every TouchMonitor comes with a basic software package. Beside the control functions, this software is able to process the signals of up to 4 routed channels in a maximum count of 4 groups at a time (up to 4 x Mono, 2 x 2-channel Stereo, 1 x 2-channel Stereo and up to 2 x Mono; no 3.1).
Software (continued) SW20005: Radar Display SW20006: RTW Premium PPM + Vectorscope High resolution circular Loudness display corresponding to the Loudness Radar Meter of TC electronic®. Licence SW20001 is required for the display of more than 4 channels. --- Precondition: Licence SW20002! --- High resolution Multistandard-PPM display with advanced scales, moving coil instruments (PPM, VU, Loudness, BBC mode), and with Audio Vectorscope (4 instances).
Dimensions TouchMonitor TM7 20700 Table-Top Unit (also 20700OEM with TM7-MADT) 1 | Front view (dimensions in mm) 3 | Rear view (dimensions in mm) 2 | Side view (dimensions in mm) Common tolerance: ±0.5 mm © 02/2018 | Technical changes without notice. | RTW GmbH & Co.KG | Am Wassermann 25 | 50829 Köln | Fon +49 221. 70 913-0 | Fax +49 221. 70 913-32 | rtw@rtw.com | www.rtw.
Dimensions (continued) TouchMonitor TM7 20700OEM OEM Mounting Version 1 | Front view (dimensions in mm, tolerance: ±0.2 mm) 2 | Side view (dimensions in mm, tolerance: ±0.5 mm) For adequate ventilation a minimum space is required: min. 10 mm at all sides and min. 100 mm on the rear side! 3 | Rear view (dimensions in mm, tolerance: ±0.5 mm) Top 4 | Front panel cut-out (dimensions in mm, tolerance: ±0.2 mm) 8 5 | Vertical mounting orientation © 02/2018 | Technical changes without notice.
Dimensions (continued) Optional TM7-MA3U Mounting Adapter for Mounting 20700OEM into Standard Racks 1 | Front view (dimensions in mm) 2 | Side view (dimensions in mm) Common tolerance: ±0.
Dimensions (continued) Optional TM7-MAVID Mounting Adapter for Mounting 20700OEM into Video Racks 1 | Side view (dimensions in mm) 2 | Front view (dimensions in mm) 3 | Mounting depth (side view with adapters, dimensions in mm) 4 | Top view (dimensions in mm) Common tolerance: ±0,5 mm Optional TM7-MAVID with 20700OEM fits into standard 19“ rack-mount cabinets for waveform monitors in video studios 20700OEM and rack-mount cabinet are not part of TM7-MAVID delivery 10 5 | Front and rear view © 02/201
Connection Connectors ATTENTION! - For operating the 20700OEM version an adapted mains adapter is required. RTW recommends the use of the RTW wide voltage power supply 1178-R (100 - 240 V AC/24 V DC, 2.71 A) approved for TouchMonitor and available as an accessory. For 20700OEM and its combinations with mounting adapters TM7-MA3U, TM7-MAVID, or TM7MADT it has to be ordered separately. This power supply is already included in the 20700 package.
Pin Assignment VGA (15-pin Sub-D-F) Analog In 1 -8 (electr.
Specifications System General Power requirements: Current drain: Power dissipation: Display: Connectors: with HW20711: with HW20712: with HW20714: with HW20715: Dimensions (W x H x D): Weight: Operating temperature: +24 V DC (external 2 A max. overcurrent protective device shall be installed!) 1 A nominal, 2.5 A power-up current (10 μsec.) approx. 8,5 W (w/o SDI), approx. 11 W (with SDI) 7’’ TFT touch screen 16 : 9 (800 x 480 pixel) 1 x 15-pin Sub-D-F; VGA output with 800 x 480 pixel, 65.
Specifications (continued) Basic 4-Channel PPM (Standard Software) General Input sources: 4-channel Peakmeter: Display: Functions: Analog Peakmeter Analog scales: Integration time: Peak hold indicator: analog and/or digital, depending on selected audio interface up to 4 x Mono, 2 x Stereo, 1 x Stereo and up to 2 x Mono (no 3.1) • max. of 4 ch. total in max. 4 groups • Peak level • Peak hold • Numerical value of the display • Gain (+20 dB, +40 dB acc.
Specifications (continued) Customer Specific Loudness Mode Display: • Bargraphs for each single channel (can be combined with PPM bargraphs) • M bargraph (Momentary - summation of momentary loudness values of all channels for a short span of time) • S bargraph (Short - loudness summation value of an adjustable dynamic time frame) • I-Bargraph (Integrated - long term loudness value infinite or manual control) • adjustable tolerance range for M, S, I Numerical display: for M, S, I values (labelling adjustable)
Specifications (continued) Weighting filter: Peak hold indicator: Measuring range: Scaling: Functions: Linear; Linear, A, C selectable 1 s, 2 s, 4 s, 10 s, 20 s, 30 s, manual reset or off 45 dB max.
Specifications (continued) Moving Coil Instrument (available in stereo mode only) Type: PPM (L/R), PPM (M/S), VU, Loudness, PPM + Loudness (L/R; M, S, or I), selectable PPM: - Ch. arrangement: Dual, Dual + M/S horizontal, Dual + M/S vertical, Stereo horizontal, Stereo vertical - Scales: • BR IIa: 7. .1, BR IIa ext: 7. .1 • BR IIb: +12. .–12 dB, BR IIb ext: +12. .–12 dB - Integration time: Sample (digital only), 0.
Specifications (continued) Analyzer Functions: Displays: - Course: - State/Alarm: - Report: • Automatic detection and analysis of incoming BLITS test signals Channel related for incoming BLITS test signals Bars for fast and easy recognition of • General signal state • Channel allocation • Level • Phase and Delay • Polarity In cases of error, the bars will be displayed in red Schedule showing values for • incoming channels • channel allocation • measured level in dBFS • detected differences in dB • Phase a
Specifications (continued) Items of Delivery • Software licence SW20006: RTW Premium PPM + Vektorskop for the display of further PPM-scales, Moving Coil instruments and audio vectorscope. Expands licence SW20001 with Multi-Correlator. TouchMonitor TM7 20700: • TM7 main unit in a table-top frame • selected audio interface • Basic software (system/Stereo-PPM) • Table-stand, mains adapter, manual Order no.: 20700 (+ HW-No.
Product Line-up TouchMonitor TM7 table-top unit 7“ touch screen 16 : 9 TFT, main unit with table-top frame, table-stand, power supply Order number: 20700 TouchMonitor TM7 OEM unit 7“ touch screen 16 : 9 TFT, main unit without table-top frame for panel-mounting Order number: 20700OEM 3U Mounting Adapter TM7-MA3U Mounting kit including a 19“/3U/42HP rack-mount panel (half-19“/3U) and fastening material for mounting 20700OEM into standard 19“ sub-racks.
