Datasheet

© 03/2020 | Changes without notice. | RTW GmbH & Co. KG | Am Wassermann 25 | 50829 Köln | Phone [phone] | Fax [phone] | [e-mail] | www.rtw.com 18
Moving Coil Instrument
(available in stereo mode only)
Type: PPM (L/R), PPM (M/S), VU, Loudness, PPM +
Loudness (L/R; M, S, or I), selectable
PPM:
- Ch. arrangement: Dual, Dual + M/S horizontal, Dual + M/S verti-
cal, Stereo horizontal, Stereo vertical
- Scales: • BR IIa: 7. .1, BR IIa ext: 7. .1
• BR IIb: +12. .–12 dB, BR IIb ext: +12. .–12 dB
- Integration time: Sample (digital only), 0.1 ms, 1 ms, 10 ms,
20 ms, 150 ms
- Headroom Ref: available with digital sources only: –10 dB;
adjustable from 0 to –20 dB in steps of 1 dB
- S mode: only available, if M/S type is selected: M3, M6
- Peak indicator: Off, Peak, True Peak, BR Peak
- BR Peak Threshold: 6 dB,
• BR IIa: adjustable from 4 to 7 dB in steps of
1 dB
• BR IIb: adjustable from 0 to 12 dB in steps
of 1 dB
VU:
- Ch. arrangement: Stereo horizontal, Stereo vertical
- Scale analog: VU (–20 to +3 dB)
- Scale digital: VU Digital (–20 to + 3 dB)
- Lead: 0 dB, adjustable from 0 to 12 dB in steps of 1 dB
- Peak indicator: Off, Peak, True Peak
Loudness:
- Ch. arrangement: Dual, Stereo horizontal, Stereo vertical
- Scales: acc. to Loudness settings
- Integration time: acc. to standard
- Peak indicator: Off, no selectable option available
PPM + Loudness:
- Ch. arrangement: Dual-PPM (as described above) with additional
Loudness display (BBC mode) for M, S, or I
(selectable) in one instrument
- Scales: • PPM: see above
• Loudness: +9 to –9 LU fi xed (mid of scale
corresponds to Target Level)
Numerical display: switchable
Audio Vectorscope (4 instances available)
in Surround mode
(if available):
- Display modes: • 2-channel
• 4-channel (fi xed: L-R above, LS-RS below)
- Inputs: in 2-channel mode selectable, selection de-
pends on selected format; e. g. for 5.1:
L/R, LS/RS, L/C, C/R, L/LS, R/RS
- AGC: fast/slow
in 2-channel Stereo mode
- Inputs: L-R
- AGC: fast/slow
- Grid: L/R or M/S
Multi-Correlator
in Surround mode
(if available): • for each channel pair of 3.1, 5.0, 5.1, 7.1 formats
• LFE mode with 5.1, 7.1 formats to display the
correlation between each single channel and
LFE channel
Specifi cations (continued)
- Display: red: negative range, white: “0” range,
green: positive range
- Filter: low pass fi lter switchable (300 Hz)
Optional Licence SW20008: TCR - Timecode Reader
Decoding of SDI embedded or LTC timecode. Timecode display. With an acti-
vated licence SW20002 the timecode can be used for loudness and logging
applications.
Timecode Reader (TCR)
Display: numerical display of
• LTC (from analog or digital sources)
• VITC (from SDI data stream)
Mode: “Timecode” selectable when creating an audio
group (constitutes a separate audio group)
Input: one analog, digital or SDI channel selectable,
depending on audio interface being mounted
Colors: selectable, 32 colors
Loud. Recal. (Loudness Recalculation)
Settings for operating automatic, semi-automatic or manual loudness mea-
surements (Loudness Test Time Control).
Display: numerical display of
• current timecode
• start time < current timecode < stop time
with recalculation
Start:
- Functions: Autostart after preset load, autostart with gate,
autostart with gate and autoreset, manually via
keys or GPI. With Timecode Reader licence
(SW20008) activated additional control via
timecode resp. timecode with recalculation.
- Level for gate: –70,0 LUFS/LKFS; adjustable from –85 to
–10 LUFS/LKFS in steps of 0.5 LUFS/LKFS
Stop:
- Functions: manually via keys or GPI, autostop with gate,
autostop with gate and time. The stop function
is automatically set and fi xed to timecode, if the
start function has been set to a timecode option.
- Level for gate: –70,0 LUFS/LKFS; adjustable from –85 to
–10 LUFS/LKFS in steps of 0.5 LUFS/LKFS
- Time for gate: 1 s; adjustable from 1 to 15 s in steps of 1 s
Optional Licence SW20013: BLITS
Tool to generate line test signals according to EBU 3304, GLITS and BLITS
defi nition. Automatic and signifi cant analysis of channel allocation, level,
phase and delay, and polarity of received BLITS 5.1 test signals.
--- Precondition: Software licence SW20001 is activated. ---
Generator
Functions: • Line test signal generators for BLITS, GLITS,
EBU 3304
• Optional intro from stored WAV fi le
Display: Channel related course of outgoing generator
sequence
Signal level: -18 dBFS nominal
Level offset: 0 dB; adjustable from -12 to +12 dB in steps of
1 dB
Outputs: digital using the output routing