Datasheet

17 © 03/2020 | Changes without notice. | RTW GmbH & Co. KG | Am Wassermann 25 | 50829 Köln | Phone +49 221. 70 913-0 | Fax +49 221. 70 913-32 | rtw@rtw.com | www.rtw.com
Measuring range: 45 dB max.
Scaling: 3, 6, 9 dB
Functions: • Input selection
Peak hold on/off
A, C, Linear weighting
Integration time
Set reference
Scaling
Frequency range
Bargraph arrangement
Display-Hold
Integration time (ballistics): Impulse, Fast, Slow, Peak (10 ms)
Optional Licence SW20004: SSA - Surround Sound
Analyzer
Dynamic display for visualizing the interaction of all surround parameter
corresponding to the subjective listening impression
--- Precondition: Software licence SW20002 is activated. ---
For the display of more than 4 channels software licence SW20001 is
required.
Surround-Sound-Analyzer
Display: • Graphical display indicating the single channel
and total program loudness acc. to selected
weighting lter (Total Volume Indicator) acc.
to selected weighting fi lters (e. g. SPL or
Loudness)
Position and width of phantom sound
sources (PSI)
Correlation of adjacent channels in PSI (color)
resp. TVI (shape of line): red resp. funnel:
negative range, yellow resp. straight line: “0”
range, green resp. roof: positive range
Separate correlators for the outer adjacent
channels switchable: red: negative range,
white: „0“ range, green: positive range
Dominance indicator (DMI)
LFE Phase (warning display, if correlation
between any channel and LFE is negative)
Optional Licence SW20005: Radar Display
High resolution circular Loudness display corresponding to the Loudness
Radar Meter of TC electronic
®
.
--- Precondition: Software licence SW20002 is activated. ---
For the display of more than 4 channels software licence SW20001 is
required.
Radar Loudness Meter
Display: Momentary Loudness values (circular)
History (circular)
Measuring time (numerical)
2 Loudness descriptors (numerical)
Peak
Mode: Radar or Statistics
Sliding Loudness: 3 s, 6 s, 10 s, 15 s, 30 s, 1 min, 2 min, 4 min, 8 min
Descriptors: Off, Program Loudness, Loudness Max, Loud-
ness Range, Sliding Loudness (max. 2 at a time)
Speed: 1, 4, 12, 30 min, 1, 2, 4, 12, 24 h
Resolution: 3 dB, 4 dB, 6 dB, 8 dB, 10 dB, 12 dB, selectable
Low Level: -30 to -6 LU
Specifi cations (continued)
Optional Licence SW20006: RTW Premium PPM plus
Vectorscope
High resolution Multistandard-PPM display with advanced scales and with
Audio Vectorscope (4 instances available) and Moving Coil instruments (PPM,
VU, Loudness, BBC mode). Expands licence SW20001 with Multi-Correlator
instrument in multi-channel mode, if activated. For the display of Loudness
software licence SW20002 is required.
General
Input sources: analog and/or digital, depending on selected
audio interface
Display: Peak level
Peak hold
Numerical value of the display
Digital Over
Functions: Gain (+20 dB, +40 dB acc. to standard)
Peak hold on/off
Memory
Reset
Analog Peakmeter Extension
Analog scales: Zoom10: +10 .. –10,
Zoom1: +1 .. –1,
SMPTE24: +24 .. –30
SMPTE20: +20 .. –40
NHK
Integration time: acc. to standard or 20 ms, 10 ms, 1 ms, 0,1 ms
Peak hold indicator: 1, 2, 4, 10, 20, 30 s, manual reset or off
Digital Peakmeter Extension
Word width: 24 bit
Digital scales: TP20: +3 .. –20 dB
Dig20: 0 .. –20 dB
Dig0: +18 .. 0 dB
Dig18: +18 .. –18 dB
Dig40: +20 .. –40 dB
ARD9: +9 .. –60 dB
DIN10: +10 .. -50 dB,
Zoom10: +10 .. –10,
Zoom1: +1 .. –1,
Headroom/Headroom Ref: adjustable from 0 to –20 dB in steps of 1 dB
Operation fi eld: adjustable from 0 to –20 dB in steps of 1 dB
Integration time (Attack): acc. to corresponding standard or selectable:
Sample, 20 ms, 10 ms, 1 ms, 0.1 ms
Gain: +20 dB, +40 dB (acc. to standard)
High-pass fi lter: Off, 5 Hz, 10 Hz, 20 Hz
Peak hold indicator: 1 s, 2 s, 4 s, 10 s, 20 s, 30 s, manual reset or off
Over indicator hold time: 1 s or manual
Over indicator PPM
- Threshold: Full Scale, Full Scale -1LSB, Full Scale -2LSB,
–0.1 dBFS, –0.5 dBFS, –1 dBFS, –2 dBFS,
–3 dBFS
- Attack time: 1 to 15 samples
- Word width: 16 to 24 bit, selectable
Over indicator True Peak
- Threshold: adjustable