Datasheet

© 03/2020 | Changes without notice. | RTW GmbH & Co. KG | Am Wassermann 25 | 50829 Köln | Phone [phone] | Fax [phone] | [e-mail] | www.rtw.com 14
Specifi cations
System
General
Power requirements: +24 V DC (external 2 A max. overcurrent pro-
tective device shall be installed!)
Some devices may have a DC input connector
marked +12 V DC. These units may be opera-
ted with a nominal DC voltage in the range of
+12 V to +24 V DC.
Current drain: 1 A nominal, 2.5 A power-up current (10 μsec.)
Power dissipation: approx. 8,5 W (w/o SDI), approx. 11 W (with SDI)
Display: 7’’ TFT touch screen 16 : 9 (800 x 480 pixel)
Connectors: 1 x 15-pin Sub-D-F; VGA output with
800 x 480 pixel, 65.536 colors, 60 Hz,
for connection of an optional external 16 : 9
VGA monitor, selectable 4 : 3 mode
1 x 4-pin locking low voltage connector
type Binder 710 (DC)
2 x USB A; USB 2.0 Full Speed connectors for:
• USB memory sticks (licence handling, pre-
set export and import, software updates)
• external computer mouse for operating
• external Wacom® graphics tablet
1 x GPIO (RJ-12-6P6C) for defi ned functions
or preset recall
1 x LAN (RJ-45)
with HW20711: 2 x 25-pin Sub-D-F (analog and digital)
with HW20712: 1 x 25-pin Sub-D-F (analog), 8 x BNC-F (digital)
with HW20714: 1 x 25-pin Sub-D-F (digital), 2 x BNC-F (3G-SDI
In, Through)
with HW20715: 2 x 25-pin Sub-D-F (digital)
with HW20717: 2 x RJ-45 (Dante™ AoIP)
with HW20718: 2 x RJ-45 (Ravenna/AES67/ST 2110 AoIP)
Dimensions (W x H x D): • 20700: 198 x 163 x 46 mm
• 20700OEM: 188 x 109 x 45 mm
- with TM7-MA3U: 42HP x 3U x 44.5 mm
- with TM7-MAVID: 214.1 x 132.6 x 49.5 mm
(429 mm depth with adapter rows), for
video rack cabinets with 407 mm depth
Weight: • 20700: approx. 2.7 kg (w/o power supply)
• 20700OEM: approx. 1.2 kg
Operating temperature: +5° to +40° C
Functions (with all licences activated)
• Operation with one fi nger (touch sensitive
display) or a computer mouse
• Instruments can be scaled and freely positioned
• Multiformat Surround PPM (3.1, 5.0, 5.1,
7.1 Cinema, 7.1 DD+)
• 2-ch. and multichannel peakmeter
• Loudness-Meter: ITU-R BS.1770-4/1771,
EBU R128, ATSC A/85, ARIB, OP-59,
AGCOM, CALM Act, LEQ(M), TASA, SAWA,
custom mode
• Loudness Test Time Control
• Loudness Range instrument (LRA)
• Logging Data Server
• Loudness Chart instrument
• Radar Loudness Meter (TC electronic®)
• SPL meter
• Timecode Reader, Loudness Recalculation
• Moving Coil (BR, VU, Loudness, BBC mode)
• Gain Reduction instrument
• Surround Sound Analyzer (up to 7.1 DD+)
• Stereo Correlator
• 10-fold Multi-Correlator with LFE mode
• 1/3-, 1/6-, 1/12-octave spectrum analyzer
• 2-channel Audio Vectorscope (4 instances)
• Dialnorm
• BLITS analyzer and generator
• AES3 status monitor
• Numerical displays
• Immersive Sound Analyzer (for 5.1.2, 5.1.4,
7.1.2, 7.1.4) and total Loudness
Analog Inputs
HW20711: 8 analog inputs, Sub-D-F connector, 25-pin
HW20712: 8 analog inputs, Sub-D-F connector, 25-pin
Reference level: adjustable in the range from 0 dBu to +10 dBu
Maximum input level: +24 dBu
Impedance: > 10 k, electronically balanced
Frequence range: 20 Hz to 22 kHz @ 48 kHz
Digital Inputs
HW20711: 4 AES3 inputs (transformer balanced, 110 ),
Sub-D-F connector, 25-pin, 4 in-and 4 outputs
HW20712: 4 AES3id inputs (unbalanced, 75 ), 8 BNC-F
connectors, 4 inputs and 4 outputs
HW20714: 4 AES3 inputs (transformer balanced, 110 ),
Sub-D-F connector, 25-pin, 4 in-and 4 outputs
and 3G-SDI interface with 2 x BNC-F connec-
tors In and Through
HW20715: 8 AES3 inputs (transformer balanced, 110 ),
2 x Sub-D-F connector, 25-pin, 4 in-and 4
outputs each
Sampling rates: 44.1, 48, 96 kHz, synchronisation to digital input
signal
Digital Outputs
HW20711: 4 AES3 outputs, Sub-D-F connector, 25-pin,
with 4 inputs and 4 outputs
HW20712: 4 AES3id outputs, 8 BNC-F connectors,
4 inputs and 4 outputs
HW20714: 4 AES3 outputs, Sub-D-F connector, 25-pin
with 4 inputs and 4 outputs and 3G-SDI inter-
face with 2 x BNC-F connectors In and Through
HW20715: 8 AES3 outputs, 2 x Sub-D-F connector, 25-pin,
4 in-and 4 outputs each
Sampling rates: referenced to digital inputs or internal clock
AoIP
HW20717: 32 Dante™ AoIP network channels, 2 x RJ-45
connectors (Primary, Secondary)
HW20717: 32 Ravenna/AES67/ST 2110 AoIP network
channels, 2 x RJ-45 connectors (Primary, Se-
condary)