Datasheet

© 03/2020 | Changes without notice. | RTW GmbH & Co. KG | Am Wassermann 25 | 50829 Köln | Phone [phone] | Fax [phone] | [e-mail] | www.rtw.com 12
Connectors
ATTENTION! - For operating the 20700OEM version or models TM7-Rack and TM7-Mount, an adapted mains
adapter is required. RTW recommends the use of the RTW wide voltage power supply 1178-R (100 - 240 V AC/24 V DC,
2.71 A) approved for TouchMonitor and available as an accessory. For 20700OEM and its combinations with mounting
adapters TM7-MA3U, TM7-MAVID, or TM7-MADT, or for TM7-Rack and TM7-Mount it has to be ordered separately.
This power supply is already included in the 20700, TM7-RAV, TM7-Dante, TM7-Video and TM7-Studio packages.
NOTE - Some devices may have a DC input connector marked +12 V DC. These units may be operated with a nominal DC
voltage in the range of +12 V to +24 V DC.
Connection
Analog In 1 - 8 (Sub-D)
Analog In 1 - 8 (Sub-D)
Audio In/Out (Sub-D)
AES3 In/Out 5 - 8 (Sub-D)
Dante™/Ravenna AoIP
Link/Act 1G Secondary (RJ-45)
Dante™/Ravenna AoIP
Link/Act 1G Secondary (RJ-45)
Audio In/Out (Sub-D)
Analog In 1 - 8 (Sub-D)
Audio In/Out (Sub-D)
Analog In 1 - 8 (Sub-D)
AES3 In/Out 1 - 4 (Sub-D)
AES3id In/Out 1 - 4 (8 x BNC)
3G-SDI In/Through (2 x BNC)
AES3 In/Out 1 - 4 (Sub-D)
Dante™/Ravenna AoIP
Link/Act 1G Primary (RJ-45)
Dante™/Ravenna AoIP
Link/Act 1G Primary (RJ-45)
3G-SDI In/Through (2 x BNC)
AES3 In/Out 1 - 4 (Sub-D)
3G-SDI In/Through (2 x BNC)
AES3 In/Out 1 - 4 (Sub-D)
4-pin locking low
voltage connector
External:
USB fl ash drive
USB mouse
Wacom® graphics tablet
External:
Standard VGA
monitor 16 : 9
VGA
HW20711 (pictured):
HW20712:
HW20714:
HW20715:
HW20717/718:
TM7-Dante/
TM7-RAV:
TM7-Video:
TM7-Studio:
TM7-Rack:
TM7-Mount:
24 V 1 A/12 V 2 A
GP IO
(RJ-12)
LAN
(RJ-45)
USB A 2.0
(Full Speed)
or or
etherCON NE8MX-6-T/ NE8MX6 + wired CAT-7 S/FTP shield etherCON NE8MX-6-T/ NE8MX6 + wired CAT-7 S/FTP shield
or