Data Sheet TouchMonitor TM7 Series
TouchMonitor TM7 Series product design award 2011 Modular Software • Touch Screen • I/O Options: Analog, AES3, AES3id, 3G SDI, AoIP • Highly Flexible Screen Layout • 2-ch. PPM/True Peak • Multichannel • Loudness • LRA • Logging • Chart • Timecode • SPL • RTA • SSA • Radar • Premium PPM • BLITS The TouchMonitor TM7 range enters a new level of professional audio metering in terms of precision, performance, efficiency and flexibility.
Hardware Common Configuration • 7“ touch screen 16 : 9 TFT (800 x 480 pixel) • 16-, 24-, or 32-channel audio interfaces (analog, AES3, AES3id, 3G-SDI, AoIP, selection required) • Connectors for Ethernet, VGA, 2 x USB 2.
Hardware (continued) HW20711 HW20712 16-channel audio interface with: • 8-channel analog inputs (electronically balanced, Sub-D) • 8-channel digital inputs and outputs (transformer balanced, 110 Ohm, 4 x AES3 In/Out, Sub-D) 16-channel audio interface with: • 8-channel analog inputs (electronically balanced, Sub-D) • 8-channel digital inputs and outputs (unbalanced, 75 Ohm, 4 x AES3id In, 4 x AES3id Out, 8 x BNC) HW20714 HW20715 8-channel audio interface and 3G-SDI interface with: • 8-channel digital
Hardware (continued) Preconfigured Models The models are already preconfigured for typical application fields and equipped with a corresponding audio interface. As the previously described devices, they can be expanded with software modules (licences).
Software Standard Software Every TouchMonitor comes with a basic software package. Beside the control functions, this software is able to process the signals of up to 4 routed channels in a maximum count of 4 groups at a time (up to 4 x Mono, 2 x 2-channel Stereo, 1 x 2-channel Stereo and up to 2 x Mono; no 3.1).
Software (continued) SW20008: Timecode Reader SW20013: BLITS Decoding of SDI embedded or LTC timecode. Timecode display. Licence SW20002 is required for the possibility of recalculating loudness. Tool to generate line test signals according to EBU 3304, GLITS and BLITS definition. Automatic and significant analysis of channel allocation, level, phase and delay, and polarity of received BLITS 5.1 test signals.
Dimensions TouchMonitor TM7 20700 Table-Top Unit (20700 + HW2071n, also 20700OEM + HW2071n with TM7-MADT, TM7-RAV, TM7-Dante, TM7-Video, TM7-Studio) 1 | Front view (dimensions in mm) 3 | Rear view (dimensions in mm) 8 2 | Side view (dimensions in mm) Common tolerance: ±0.5 mm © 03/2020 | Changes without notice. | RTW GmbH & Co. KG | Am Wassermann 25 | 50829 Köln | Phone +49 221. 70 913-0 | Fax +49 221. 70 913-32 | rtw@rtw.com | www.rtw.
Dimensions (continued) TouchMonitor TM7 20700OEM OEM Mounting Version (20700OEM + HW2071n, also TM7-Mount) 1 | Front view (dimensions in mm, tolerance: ±0.2 mm) 2 | Side view (dimensions in mm, tolerance: ±0.5 mm) For adequate ventilation a minimum space is required: min. 10 mm at all sides and min. 100 mm on the rear side! 3 | Rear view (dimensions in mm, tolerance: ±0.5 mm) Top 4 | Front panel cut-out (dimensions in mm, tolerance: ±0.
Dimensions (continued) Optional TM7-MA3U Mounting Adapter for Mounting 20700OEM into Standard Racks 1 | Front view (dimensions in mm) 2 | Side view (dimensions in mm) Common tolerance: ±0.
Dimensions (continued) Optional TM7-MAVID Mounting Adapter for Mounting 20700OEM into Video Racks (also TM7-Rack) 1 | Side view (dimensions in mm) 2 | Front view (dimensions in mm) 3 | Mounting depth (side view with adapters, dimensions in mm) 4 | Top view (dimensions in mm) Common tolerance: ±0,5 mm Optional TM7-MAVID with 20700OEM fits into standard 19“ rack-mount cabinets for waveform monitors in video studios NOTE - 20700OEM and rack-mount cabinet are not part of TM7-MAVID delivery 5 | Front and
Connection Connectors ATTENTION! - For operating the 20700OEM version or models TM7-Rack and TM7-Mount, an adapted mains adapter is required. RTW recommends the use of the RTW wide voltage power supply 1178-R (100 - 240 V AC/24 V DC, 2.71 A) approved for TouchMonitor and available as an accessory. For 20700OEM and its combinations with mounting adapters TM7-MA3U, TM7-MAVID, or TM7-MADT, or for TM7-Rack and TM7-Mount it has to be ordered separately.
Pin Assignment Analog In 1 -8 (electr. bal., 25-pin Sub-D-F) Pin: Function: 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9 22 10 23 11 24 12 25 13 Analog input 8 resp. 16 (+, hot) Analog input 8 resp. 16 (–, cold) Shield/chassis Analog input 7 resp. 15 (+, hot) Analog input 7 resp. 15 (–, cold) Shield/chassis Analog input 6 resp. 14 (+, hot) Analog input 6 resp. 14 (–, cold) Shield/chassis Analog input 5 resp. 13 (+, hot) Analog input 5 resp. 13 (–, cold) Shield/chassis Analog input 4 resp.
Specifications System General Power requirements: Current drain: Power dissipation: Display: Connectors: with HW20711: with HW20712: with HW20714: with HW20715: with HW20717: with HW20718: Dimensions (W x H x D): Weight: Operating temperature: +24 V DC (external 2 A max. overcurrent protective device shall be installed!) Some devices may have a DC input connector marked +12 V DC. These units may be operated with a nominal DC voltage in the range of +12 V to +24 V DC. 1 A nominal, 2.
Specifications (continued) Basic 4-Channel PPM (Standard Software) General Input sources: 4-channel Peakmeter: Display: Functions: Analog Peakmeter Analog scales: Integration time: Peak hold indicator: analog and/or digital, depending on selected audio interface up to 4 x Mono, 2 x Stereo, 1 x Stereo and up to 2 x Mono (no 3.1) • max. of 4 ch. total in max. 4 groups • Peak level • Peak hold • Numerical value of the display • Gain (+20 dB, +40 dB acc.
Specifications (continued) Customer Specific Loudness Mode Display: • Bargraphs for each single channel (can be combined with PPM bargraphs) • M bargraph (Momentary - summation of momentary loudness values of all channels for a short span of time) • S bargraph (Short - loudness summation value of an adjustable dynamic time frame) • I-Bargraph (Integrated - long term loudness value infinite or manual control) • adjustable tolerance range for M, S, I Numerical display: for M, S, I values (labelling adjustable)
Specifications (continued) Measuring range: Scaling: Functions: 45 dB max.
Specifications (continued) Moving Coil Instrument (available in stereo mode only) Type: PPM (L/R), PPM (M/S), VU, Loudness, PPM + Loudness (L/R; M, S, or I), selectable PPM: - Ch. arrangement: Dual, Dual + M/S horizontal, Dual + M/S vertical, Stereo horizontal, Stereo vertical - Scales: • BR IIa: 7. .1, BR IIa ext: 7. .1 • BR IIb: +12. .–12 dB, BR IIb ext: +12. .–12 dB - Integration time: Sample (digital only), 0.
Specifications (continued) Analyzer Functions: Displays: - Course: - State/Alarm: - Report: • Automatic detection and analysis of incoming BLITS test signals Channel related for incoming BLITS test signals Bars for fast and easy recognition of • General signal state • Channel allocation • Level • Phase and Delay • Polarity In cases of error, the bars will be displayed in red Schedule showing values for • incoming channels • channel allocation • measured level in dBFS • detected differences in dB • Phase a
Specifications (continued) Optional Licence SW20015: ISA - Immersive Sound Analyzer TM7-Video: • TM7 in table-top frame with audio interface for 8-ch. digital inputs and outputs (4 x AES3 In/ Out, Sub-D) and 3G-/HD-/SD-SDI In/Through (2 x BNC) • Basic software (system/2 x Stereo-PPM) • Table-stand, mains adapter, manual Order no.: TM7-Video Dynamic display for visualizing the interaction of all signal parameters of spatial (immersive) surround formats like 5.1.2, 5.1.4, 7.1.2 or 7.1.
Specifications (continued) Optional Software Licences • Software licence SW20015: ISA - Immersive Sound Analyzer to understand the balance of immersive surround programmes intuitively and for cross-group Loudness measurement. --- Precondition: Licences SW20001, SW20002, and SW20004! --- • Software licence SW20001: Multichannel Mode for the display of multi-channel modes • Software licence SW20002: Loudness and SPL Display for Loudness, SPL and LRA measurements.
Product Line-up TouchMonitor TM7 table-top unit 7“ touch screen 16 : 9 TFT, main unit with table-top frame, table-stand, power supply. Audio interface required! Order number: 20700 + TouchMonitor TM7 OEM unit 7“ touch screen 16 : 9 TFT, main unit w/o table-top frame, w/o power supply for panel-mounting.
