User manual

26
*****************************
RVON-C Revision 1.00.02
(C) Copyright 2003 Telex Inc. All Rights Reserved.
Flash File System initialized.
DIP Switch settings:....XXXX
Configuration via AZedit disabled (via DIP Switch 1 on)
Back card UART enabled for pass-through serial (via DIP Switch 6 off)
Boot downloader disabled (via DIP Switch 7 off)
Autoload enabled (via DIP Switch 8 off)
Monitor Revision 1.00.02
Monitor Compilation time Oct 18 2005, 14:33:52
Processor ID / Revision 0x80 (4Kc) / 0x05
Avalanche Device Type Avalanche-I, Revision 1.3
Memory Controller Revision 1.204
Endianness Big
External Memory rate Full
CPU Frequ 8 MBytes
RAM size 64 MBytes
First free RAM address 0x9401f1a8
PLL Mode Operating 2.50X
-
Press any key to abort OS load, or wait 1 seconds for OS to boot...
** Defragmenting File System and Environment flash area(s) **
Reading flash file system... No deleted flash file entries found.
Reading environment flash space... Complete.
FlashEraseBlock(b07f8000);
..
Copying environment to flash... Complete.
Loading file /bin/telex1 from FFS
PC: 94020000
FTP done!, PC: 94020000
Target Name: vxTarget
Attached TCP/IP interface to emac unit 0
Attaching network interface lo0... done.
0x97e796f0 (tNetTask): Link is down on EMAC A.
NFS client support not included.
Adding 5160 symbols for standalone.
appCreate: autoBootLevel=2
MXP environment is created.