Intercom Systems Innovating the Future of Global Communications
Worldwide Connectivity | 3 | Table of Contents KP-32 KP-32 ADAM Worldwide Connectivity ���������������������������������3 KP-12 IFB 828 RP-1000 Digital Matrix ��������������������������������������������4–23 Intercom Matrices �����������������������������������4 PAM-32 IFB 325 RTS+OMNEO �������������������������������������������6 SIP-ISDN Trunkmaster Series ����������������������������������9 ADAM Interface Cards ��������������������������������������10 RVON VoIP Devices & Breakout Panels
4| Digital Matrix Digital Matrix | 5 Intercom Matrices ADAM ADAM-M Using a Time Division Multiplex (TDM) technique, ADAM grows linearly as users are added; the system comes standard with newly redesigned, redundant high-current power supplies. The Ethernet master controller, MCII-E, allows for automatic changeover in the event of failure.
6| Digital Matrix Digital Matrix | 7 RTS+OMNEO ...with pure IP connectivity, ultra-low latency and full HD audio OMI OKI This card fits into the standard slots of the RTS ADAM or ADAM-M frames and provides a gateway to the world of OMNEO IP-compatible networking.
8| Digital Matrix ARNI & Tri-Bus Multi-Frame Topology ARNI Trunkmaster Series Digital Matrix | 9 TM-10K Audio Routed Network Interface High Capacity Trunkmaster ARNI significantly extends the reach of an OMNEO-based RTS intercom network to function seamlessly across subnets. ARNI enhances the flexibility of system deployments by providing network services and network-wide synchronization for OMNEO traffic.
10 | Digital Matrix Interface Cards Digital Matrix | 11 RVON VoIP Devices & Breakout Panels RVON VoIP Devices RTS interface cards are the core of the modular digital matrix intercom concept. An array of features and connectivity options allow users to customize their ADAM matrix to integrate seamlessly into a cohesive communication network. Each new generation provides expanded possibilities for existing ADAM frames, solidifying its investment value for years to come.
12 | Digital Matrix RTS VLink Software RTS VLink is a new, fully interconnected software application that enables remote users to interface with RTS matrix intercoms, allowing an unprecedented degree of control and flexibility from anywhere in the world. The RTS VLink system provides intelligent trunking links into an RTS intercom matrix to provide full support for RTS intercom alphas and matrix access for standard communications workflows.
14 | Digital Matrix Digital Matrix | 15 Color Series Keypanels RP-1932 KP 12 CLD Color Display Expansion Panel 12-Position Color Display Keypanel RP-1000 Series 32-Position Color Display Keypanel DKP 16 CLD Color Display Desktop Keypanel The Color Series represents the latest generation of RTS keypanels. The panels sport advanced features that take flexibility and ease-of-use to the next level. The Color Series feature a revolutionary customizable GUI in integrated fullcolor TFT displays.
16 | Digital Matrix Digital Matrix | 17 KP-32 Keypanel Series KP-32/16 KP-32 EKP-32 16-Position, 4-Character Keypanel 32-Position, 4-Character Keypanel 32-Position, 4-Character Expansion Panel Which keypanel series is right for you? The RTS KP-32 family of keypanels offers an unbeatable match of features, options and performance. The RTS KP32 keypanel fits in a standard 19” rack and is 2RU high.
18 | Digital Matrix Digital Matrix | 19 KP-12 Keypanel Series EKP-20 20-Postition Expansion Panel KP-12 12-Position Keypanel LCP-20 20-Position Level Control Panel The KP-12 modular series of keypanels represents the ultimate in compact, fully-programmable user stations.
20 | Digital Matrix Digital Matrix | 21 Value Keypanel Series MKP-4 BKP-4 WKP-1 WKP-4 4-Position Rackmount/Desktop Keypanel 4-Postition Desktop Keypanel MKP-12 12-Postition Rackmount Keypanel 1-Position Wall Keypanel 4-Postition Wall Keypanel The RTS value keypanel series is ideal where simplicity of operation and cost are paramount. The keypanels share a common set of features across the entire family.
22 | Digital Matrix Digital Matrix | 23 System Peripherals GPIO-16 MDA-100 LCP-102 PAP-32 The GPIO-16 interface provides 16 opto-isolated inputs and 16 relay outputs. It connects to the matrix via serial or Ethernet for remote operations. The MDA-100 contains an 8 x 1-summing amplifier (mixer) and a 1 x 8 distribution amplifier. The LCP-102 functions as an analog trim panel, used to either adjust input/output gains, partyline assignments or program assignments for IFBs.
24 | Partyline Power Supply Master Station Partyline | 25 Power supplies are the heart of partyline intercom systems. They supply operating voltage to beltpacks and many user stations. Unique, short-circuit reset circuitry design and unparalleled mechanical engineering ensures reliable, trouble-free operation for years to come. With all of the things you have to worry about, power supplies should not be one of them.
26 | Partyline Partyline | 27 User Stations RTS two-wire intercom user stations employ a unique modular design that enables a few station types to be configured into a multitude of communications solutions. Rugged and dependable RTS two-wire intercom user stations form the widest variety of stationary communications stations in the industry. RTS two-wire intercom user stations are the perfect choice for a wide range of applications regardless of what physical profile is required.
28 | Partyline Beltpacks IFB System Peripherals Using the latest in space-age materials, RTS two-wire intercom beltpacks are mechanically engineered to be rugged and dependable. Unique audio circuitry is perfect for either high- or low-noise environments while maintaining maximum voice intelligibility. BP-319 BP-351 The BP-319 is a portable beltpack for use with RTS two-wire intercom systems. The BP-319 is a microprocessor controlled one-channel intercom beltpack.
30 | Partyline Accessories AudioCom RTS offers a full line of products to complete your communications system, including interfaces to partyline intercoms, cables, telephone lines and relays. Accessories also include control panels for IFB levels and assignments, panels for adjusting system audio levels, microphones and 4-wire beltpacks. RTS two-wire intercom source assignment panel accessories are a key element in large, high-end RTS two-wire intercom partyline systems.
32 Product Specifications | 33 | Product Specifications 19" Rackmount Products Product Height Depth Weight Color Product Height Depth Weight Color 4010 1RU 15" (38.1 cm) 10.74 lb (4.87 kg) Grey RP-1000 2RU 3.25" (8.25 cm) 6.3 lb (2.86 kg) Duotone 4012 3RU 5.06" (12.86 cm) 3.72 lb (1.69 kg) Silver RP-1932 2RU 3.25" (8.26 cm) 6.3 lb (2.86 kg) Duotone ADAM 7RU 21" (53.34 cm) 48 lb (21.77 kg) Grey RVON-I/O 1RU 8" (20.32 cm) 3.7 lb (1.67 kg) Grey ADAM-M 3RU 21" (53.
34 | Headsets Headsets | 35 Intercom Headsets RTS offers a wide variety of headset styles to choose from, including lightweight and full-cushion headsets in either single or dual-sided versions. We also have hearing protection headsets that offer noise reduction of up to 24 dB and earset selections that can accommodate all applications. Most headsets feature our latest flexible boom arms and are terminated with an A4M connector for compatibility with RTS intercom systems.
For information on any of the products featured in this catalog, you can reach us at info@rtsintercoms.com Please visit the RTS website at: www.rtsintercoms.com Headquarters Americas Bosch Security Systems, Inc. 12000 Portland Ave South Burnsville, MN 55337 | USA Phone: 1 800 289 0096 Fax: 1 800 955 6831 buv.orders@us.bosch.com ©2013 Bosch Security Systems, Inc. LITRTSCAT0813 Information in this document is subject to change without notice. Technical specifications may vary with options ordered.
