Specifications

DeviceMaster Installation and Configuration Guide: 2000506 Rev. B Hardware Specifications - 87
External Power Supply Specifications
External Power Supply Specifications
This subsection discusses information that you may need if you wish to use your own
external power supplies.
• 1-Port 5VDC Power Supply
(below)
• 1-Port
5-30VDC Power Supply on Page 87
• 2-Port (Serial Terminals) Power Supply on Page 88
• 2-Port (DB9) Power Supply on Page 88
• 4-Port Power Supply on Page 88
• 8-Port Power Supply on Page 88
• 16-Port Power Supplies on Page 89
1-Port 5VDC Power
Supply
This subsection only provides information for the
DeviceMaster 1-port 5VDC model.
The following table provides the specifications, if you intend on purchasing your own
external power supply.
1-Port 5-30VDC Power
Supply
This table provides specifications for the optional
power supply from Comtrol.
This table provides the specifications, if you intend
on using your own power supply.
Comtrol Power Supply: 1-Port 5VDC
Input line frequency
Input line voltage
Output voltage
Output current
47 - 63 Hz
90 - 132VAC (standard RTS)
90 - 260VAC (IAD model)
5VDC
2.4A @ 5VDC
External Power Supply: 1-Port 5VDC
Output voltage†
Current†
Power
5VDC
420 mA (Min) @ 5VDC
2.1 W
† Any power supply that meets current consumption, voltage, power,
and connector pinouts requirements can be used.
+VDC
Power Connector
Coaxial 5.5±0.1 x 2.1 mm
Comtrol Power Supply: 1-Port 5-30VDC
Input line frequency
Input line voltage
Output voltage
Output current
43-63 Hz
90-260 VAC
24VDC
500 mA @ 24VDC
External Power Supply: 1-Port 5-30VDC
Output voltage†
Current†
Power
5-30VDC
100 mA (Min) @ 24VDC
2.5 W
† Any power supply that meets current consumption,
voltage, power, and connector pinouts requirements
can be used.
Earth Gnd
Return
Positive
5-30VDC
+
-
Wire gauge:
AWG 12-22
Screw Terminal Connector
(included with the 1-port
enclosed model)