Specifications

82 - RedBoot Procedures DeviceMaster Installation and Configuration Guide: 2000506 Rev. B
Configuring Passwords
If uploading SocketServer:
a. At the RedBoot> prompt, type: fis list and press Enter.
Note: You should see file information for a file called default. If you do not see this
file, repeat the process starting with Step 7
.
b. Reset the DeviceMaster by typing reset at the RedBoot> prompt.
Note: In a few seconds the ethernet and PWR LEDs cycle through a light sequence
once.
c. Start your internet browser and enter the IP address of the DeviceMaster to
verify that the new version of SocketServer loads.
Configuring Passwords
This section discusses how to configure a password for the web and telnet server.
Note: See the PortVision Plus or socket Help system for information about email
notification.
Use the following procedure to establish the DeviceMaster password for the Web and
telnet server. Establishing a password prevents unauthorized changes to the
DeviceMaster configuration.
1. Establish communications with the DeviceMaster using the serial (Page 79) or telnet
method (Page 76).
2. Type password [your_password] and press Enter.
Note: If you forget your password, you can reprogram the password using the serial
method which bypasses the password.
Note: The Bootloader version on your DeviceMaster may be different than the version
displayed in this graphic.
See the auth command in the Redboot Command Overview
on Page 83 if you want to set
up Web browser authentication.
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
FIS_directory 0x053F0000 0x053F0000 0x00010000 0x00000000
default 0x05030000 0x00000000 0x00090000 0x00000000
RedBoot>
Password:
*********************************************
**
** Comtrol DeviceMaster Bootloader Version 3.05
** RedBoot(tm) environment - built 08:13:02, Apr 4 2008
** Platform: Comtrol DeviceMaster (ARM 7TDMI)
** Portions Copyright (C) 2000. Red Hat, Inc.
** Portions Copyright (C) 2001-2008 Comtrol Corp.
*********************************************
FLASH: 64 blocks of 65536 bytes each
FLASH: 4194304 bytes (0x05000000 - 0x05400000)
RAM: 8126464 bytes (0x00000000 - 0x007c0000)
RedBoot> dis
Loading disabled
RedBoot> password dev1357
Password ‘dev1357’
RedBoot>