Specifications

DeviceMaster Installation and Configuration Guide: 2000506 Rev. B Hardware Installation - 13
Hardware Installation
Installation Overview
The DeviceMaster enables communications with serial devices over an Ethernet network.
The DeviceMaster provides for remote management, configuration, and connectivity
through its 10/100BASE–T Ethernet connection.
Use the links below to locate installation procedures for the following models:
DeviceMaster PRO
DB9 serial ports with dual
Ethernet†† ports
8† 4-Port and 8-Port Models
on Page 24
RJ45 serial ports with dual
Ethernet†† ports
16 16-Port (DeviceMaster PRO) on Page 28
DeviceMaster RTS
DB9 serial port with a single
Ethernet port
1 1-Port - Enclosed Models
on Page 14
Embedded system 1 1-Port - Embedded Model on Page 16
Screw terminal serial ports 2‡
2-Port (Serial Terminal) 1E/2E Models on Page
20
DB9 serial ports 2‡ 2-Port (DB9) 1E/2E Models on Page 22
DB9 serial ports with dual
Ethernet†† ports
4† or
8†
4-Port and 8-Port Models on Page 24
RJ45 serial ports with dual
Ethernet†† ports
16
16-Port (DeviceMaster RTS - External Power
Supply) on Page 26
RJ45 serial ports with a single
Ethernet port
16 or
32
16/32-Port Rack Mount Models (Internal Power
Supply) on Page 30
DeviceMaster Serial Hub
DB9 serial ports with dual
Ethernet†† ports
8 4-Port and 8-Port Models
on Page 24
DB9 serial ports with a single
Ethernet port
16
16/32-Port Rack Mount Models (Internal Power
Supply) on Page 30
† The DeviceMaster RTS 4 and 8-port models may also include DB9 to RJ45 adapters.
†† One of the Ethernet ports on the DeviceMaster is a built-in downstream port for
daisy-chaining DeviceMaster systems or other network-ready devices.
‡ Either Ethernet port on the DeviceMaster RTS 2-port 2E model can be used for daisy-
chaining DeviceMaster systems or other network-ready devices.
Default Network Settings
IP address:
192.168.250.250
Subnet mask:
255.255.0.0
Gateway address:
192.168.250.1