Installation Guide
page 6 of 8
5
6
Your 50 US Gallon Dual Spigot Flat Back Rain Barrel
is now assembled. Place the rain barrel on a at
surface or on a RTS Home Accents Rain Barrel
Stand (sold separately). Ensure the downspout is
lined up for the water to ow into the screen on the
top of your rain barrel.
If you have are linking multiple 50 US Gallon
Flat Back Rain Barrels, follow steps 6 to 9.
If you have a 25 US Gallon Rainwater Shed
Collector, follow step 7.
The following steps are only needed if installing a hose barb to link two rain barrels together or for the
overow on your 25 US Gallon Rainwater Shed Collector.
If you are linking three or more rain barrels together, please contact us for additional hose barbs.
Using a 1” spade drill bit, drill a hole in the at area on the left or right side of the rain barrel. The hole location
is shown in the image below.
The hole has already been pre-drilled in your 25 US Gallon Rainwater Shed Collector.