User guide

Tr o u b l e s h o o t i n g
4 The Motor is in a strange mode, it is slow (or very fast)
Each motor is given a RESPONSE, and the motor remembers its response even
through a power cycle. To change it, Enter the Menu … MOTORS … SET
RESPONSE.
5 The Zoom Motor calibrates but then doesn’t respond
ZOOM SPEED might be set to minimum. This is usually set by SIDE KNOB A.
6 When very close to camera, the wireless cuts out
This is normal. The MK3.1 has a very powerful wireless transmitter- when very
close, it will overload the Receiver. Then the Controller’s WIRELESS / POWER
setting down to MED or LOW.
36