User guide
U p d a t i n g F i r m w a r e s
Updating a Motor
1. Run the Program.
2. Make sure the Receiver is not powered and that no motors are
attached.
3. Connect the USB cable from the Receiver to your computer.
The Receiver should power up.
4. The program will now detect and connect to the Receiver. You
should see, “Connected to Device” in the program.
5. Attach 12V power to the Receiver.
6. In the “Which Device to Update” section, select Motor from the
drop down menu.
7. In the “Firmware” section there should only be one firmware to
select from the drop down.
8. Click the “Update Device” button.
9. Attach ONE motor to the Receiver. The update process should
begin.
10.When the motor begins moving, detach it from the Receiver.
The process is complete.
11. If you need to update another motor, go to step 8.
Note: You can only update one motor at a time. Do not attach more than one motor or
the update will fail.
23