User guide

U p d a t i n g F i r m w a r e s
Updating The Controller Firmware
1. Run the Program.
2. Make sure the controller is turned off.
3. Connect the USB cable from the Controller to your computer.
4. Hold down the SET and POWER buttons simultaneously on the
controller for about 2 seconds. The screen will display: PC MODE.
5. The program will now detect and connect to the Controller. You
should see, “Connected to Device” in the program.
6. In the “Firmware” section, use the drop down menu to select a
firmware version that matches your controller type:-
1. Select Controller_MK3-B... for the Basic Controller.
2. Select Controller_MK3-S... for the Slider Controller.
3. Select Controller_MK3-Z... for the Force-Zoom Controller.
7. Click the “Update Device” button.
Note: The first time you connect your device, your operating system may install HID
“Human interface device drivers and require you to restart your computer. This is
normal.
21