User guide

M K 3 . x R e c e i v e r
Operation
Connection
MOTORS
Lemo 0B 4-pin Any motor can connect to any port.
PWR
Hirose HR10 4-pin Power Input, 1=GND, 4= Voltage.
CAM
Hirose HR10 4-pin Trigger (Output) for CAMERA.
AUX
Lemo 0B 5-pin Analogue controllers, Wired Mode, etc.
USB
Micro USB For connection to a PC.
Status Light
SOLID GREEN – CONNECTED PURPLE – Please Wait
ORANGE – No Connection (or PC Mode) RED (solid) – Cam running
BLUE – Wired Mode RED (pulse) – Cam trig
Power Requirements
5 – 14V DC (17V absolute max - e.g. 13.8V battery fresh off a charger). The
Receiver will block any voltage over ~17.5V, or any reverse voltage.
14