User guide

M K 3 . x R e c e i v e r
MK3.x Receiver
The MK3.1 Receiver is a unique, ultra-compact design. From version MK3.1, the
antenna is integral and the length reduced even further.
Note: Picture shows MK3.1 version.
Variants
MK3 versions have RF2 wireless modules, and no AUX port.
MK3.1 versions have RF3 wireless modules. See section page 29 for more info.
Supported Motors
3x RT Motion motors are supported.
The Receiver does not natively support motors from other manufacturers. It is
planned to release adongle adapter to support 3
rd
party motors (Heden,
Preston, etc.) soon.
Camera Support
Attach the corresponding cable between the CAM port and your camera.
There are cables available for all major cameras (EPIC, ARRI, etc.). You must also
select your camera-type from the Controller Menu, see page 26.
13