Operating instructions

ManualsBrandsRTI ManualsComputer equipmentXP-8

Quick Reference Guide

XP-8s Advanced Control Processor

The XP-8s is a high-end remote control processor for automating the operation of electronic systems in homes and

ofce buildings. The combination of a blazing fast MPU, real-time/multitasking operating system, and tremendous

expandability make the XP-8s the perfect solution for large-scale and complex projects.

The XP-8s provides superior quality and reliability as well as these features:

• Powerful 532MHz i.MX processor.

• 128Mb of non-volatile Flash memory.

• Front panel controls/display (11 Buttons for front panel control).

• Includes 4GB SD Flash memory card.

• Eight multi-purpose I/O ports.

• Eight programmable relay outputs.

• Eight two-way RS-232 ports.

• Eight sense inputs.

• Multi-purpose I/O ports are compatible with industry-standard IR emitters, blasters and repeater systems.

• All output ports incorporate both short-circuit and overload protection.

• Variable IR output on all ports.

• Multi-purpose I/O ports support all optional RTI power sensing and communications modules.

• Non-volatile Flash memory stores your system conguration even when power is not present.

• Field upgradeable rmware.

• USB and Ethernet programming.

• Input for connection of multiple RF receiver modules.

• Astronomical clock built in.

• Rack mountable or free standing.

XP-8s

Advanced Control Processor

Summary of content (4 pages)

PAGE 1
XP-8s Advanced Control Processor Quick Reference Guide XP-8s Advanced Control Processor The XP-8s is a high-end remote control processor for automating the operation of electronic systems in homes and office buildings. The combination of a blazing fast MPU, real-time/multitasking operating system, and tremendous expandability make the XP-8s the perfect solution for large-scale and complex projects.
PAGE 2
Touchscreen Control Panel Installation & Operation The XP-8s can be connected in many different ways to control a variety of devices. The following diagram illustrates just some of the options. Optional accessories shown are sold separately.) MPIO Ports - Infrared/Sensing/RS-232 (One-way) CONNECTING IR EMITTERS TO OUTPUT PORTS The multi-purpose I/O ports on the XP-8s are compatible with industry standard infrared emitters and infrared repeating systems.
PAGE 3
It’s Under Control® Relay/Trigger Outputs Configurable within Integration Designer® to be either a dry contact closure or a voltage trigger output (12VDC @100mA). All relays are Normally Open when not energized, but they can be programmed to behave Normally Closed (as long as power is applied to the XP-8s). Drapes + - For contact closure control, connect the A and B contact terminals of a relay to the desired device.
PAGE 4
It’s Under Control® Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.