User manual

Seite 65 von 128
8. Installation
1.) Inspect the packaging carton and its contents to ensure
that nothing is missing and to check for any damage.
Please inform the transport agency immediately should
you find signs of damage. Please keep the packaging in a
safe place for future use.
Description
Quantity XANTO RT 1000 XANTO RT 2000 XANTO RT 3000 XANTO RT 2000 Batterypack XANTO RT 3000 Batterypack
19“ mounting angle 2 X X X X X
Baseplate for tower installation 2 X X X - -
Baseplate, extension 2 - - - X X
10A non-heating appliance extension 2 X X X - -
16A mains cable 1 - - X - -
Battery cable 1 - - - X X
Interface cable 1 X X X - -
Software DataWatch 1 X X X - -
Operating instructions 1 X X X - -
Table 9: Scope of supply
2.) The UPS is cooled by means of forced ventilation using
internal fans. Please ensure a min. clearance of 30cm to
the rear of the UPS.
3.) Connect the UPS system to a building wiring socket outlet
(with earthing contact) using a VDE-tested and CE-
marked mains cable. To connect the XANTO RT 3000
please use the mains cable supplied with the unit.