User manual

RT USB3000 Technical Description and User Manual Rev. 4.1. 13 of 18
You should select “Browse my computer for driver software” and specify the “\DRV” folder on the
included CD as the location of the driver.
Then you should follow the instructions of the Wizard. Once the driver is successfully installed, the
“RT USB3000 ADC/DAC Unit (USB 2.0)” device should appear in the Device Manager:
This means that the device has been identified correctly by the PC, the driver is installed and the
device is ready to work.
Afterwards, when the RT USB3000 device is connected to another USB port of the PC, Windows
might once again detect the RT USB3000 device as “unknown device”. In this case you will have to
repeat the driver installation procedure as described above.