Specifications

Controls and Settings

1. Current Control Knob

This selects the welding power and is shown in LED display (3)

2. Warning indicator light

Lights RED when over-heat thermostat protection has occurred, due to over work or poor

airflow. Fan will continue to run and once machine has cooled down light will go off and

machine is ready to use.

Note: This light will come on for 1-2 seconds when first turned on and then will go off once

start up self test has finished.

3. Display LED

This LED shows the selected welding current.

4. MMA / Lift TIG switch

Selects MMA or Lift Tig operation