User`s manual

RTD Embedded Technologies, Inc. | www.rtd.com 16 LAN17255HRHR User’s Manual
IDAN Connector Location 5.3
Figure 7: IDAN Connector Location
IDAN-LAN10257HR 5.4
This utilityModule is also available in an IDAN configuration. The IDAN module is shown below.
Figure 8: IDAN-LAN10257HR Rear View
Figure 9: IDAN-LAN10257HR Front View
IDAN Twisted Pair Ethernet P1, P2, P3, P4, and P5 5.5
As an IDAN, the Ethernet signals are available on five “D” connectors, two on the front and three on the back. A DB-9 to RJ-45 adapter is also
included for each port. The pin out is listed in the table below.