User`s manual

96
Devices Di-
mension
Í
Î Selects the size of each memory device for the
SSD.
Possible selections:
• Flash (128k, 256k)
• EPROM (128k, 256k, 512k, 1Mbyte)
• RAM (128k, 512k)
Select a setting which agrees with the installed
memory devices and the positions of jumpers JP1,
JP7, JP2, and JP8.
Devices
Number
Í
Î Selects the number of memory devices for the
SSD.
Possible selections:
•One
• Two(UseonlywithCMVfamily)
Devices
Type
Í
Î Selects the type of memory devices used to imple-
ment the Solid State Disk.
Possible selections:
• Flash
• EPROM
If EPROM is selected, the binary files construct
mode is automatically enabled.
Input File
Í
Î
{TAB},{char}
Defines the name of the input file in MiniDOS or
BIOS Extension mode. In MiniDOS mode, the
filename must have the extension .EXE.
MiniDOS
option
Í
Î Selects either MiniDOS or BIOS Extension mode.
Source Disk
Í
Î Selects the floppy you wish to have copied into the
SSD.
SSD Win-
dow
Í
Î Selects the 16KB memory window used for the
SSD.
Selections are
• from 0C0000H
• to 0EC000H
by 32KB steps.
This window is used only when programming the
SSD in the cpuModule socket(s).
It must not be in use by any other device.