User`s manual

57
Advanced Setup Fields
Field Active keys Selections
SSD Device in
U1
Í
Î Selects the device type installed in the first SSD
socket.
• The setting here must match the actual device
installed in the socket.
• Jumpers JP1 and JP7 must be set correctly.
SSD Device in
U2
Í
Î Selects the device type installed in the second SSD
socket.
• The setting here must match the actual device
installed in the socket.
• Jumpers JP2 and JP8 must be set correctly.
SSD Window
Í
Î Selects the 16Kbyte address range where the SSD is
mapped.
Selections are:
• D0000H (to D7FFFH)
• D8000H (to DFFFFH)
• E0000H (to E7FFFH)
• E8000H (to EFFFFH)
When selecting the address range, you must ensure
that:
• no other devices are mapped to the same memo-
ry addresses
• shadow memory is not enabled at the same
memory addresses
• selection does not conflict with selection of
BIOS EXT@D000 / D800 / E000 / E800
• BIOS EXT devices use an 32 Kbyte address
block
IRQ3 Source
Í
Î Determines source for IRQ3 interrupt.
•Disabled
•SerialCN7
• Serial CN8(default)
If set to disabled, IRQ3 may be an input from the
PC/104 bus.
IRQ4 Source
Í
Î Determines source for IRQ4 interrupt.
•Disabled
• Serial CN7 (default)
•SerialCN8
If set to disabled, IRQ4 may be an input from the
PC/104 bus.
IRQ5 Source
Í
Î Determines source for IRQ5 interrupt.
• Disabled (default)
•SerialCN7
•LPT
If set to disabled, IRQ5 may be an input from the
PC/104 bus.